Metal−organic framework (MOF) glasses provide new perspectives on many material properties due to their unique chemical and structural nature. Their mechanical properties are of particular interest because glasses are inherently brittle, which limits their applications as structural materials. Here we perform strainrate-dependent uniaxial micropillar compression experiments on a g ZIF-62, a g ZIF-UC-5, and a g TIF-4, a series of MOF glasses with different substituting linker molecules, and find that these glasses show substantial plasticity, at least on the micrometer scale. At a quasi-static strain rate of 0.001 s −1 , the micropillars yielded at approximately 0.32 GPa and subsequently deformed plastically up to 35% strain, irrespective of the type of substituting linker. With increasing strain rate, the yield strength of a g ZIF-62 evolved with the strain-rate sensitivity m = 0.024 to reach a yield strength of 0.44 GPa at a strain rate of 510 s −1 . On the basis of this relatively low strain-rate sensitivity and the absence of serrated flow, we conclude that structural densification is the predominant mechanism that accommodates such extensive plasticity.
Magnesium has attracted attention worldwide because it is the lightest structural metal. However, a high strength-to-weight ratio remains its only attribute, since an intrinsic lack of strength, ductility and low melting temperature severely restricts practical applications of Mg. Through interface strains, the crystal structure of Mg can be transformed and stabilized from a simple hexagonal (hexagonal close packed hcp) to body center cubic (bcc) crystal structure at ambient pressures. We demonstrate that when introduced into a nanocomposite bcc Mg is far more ductile, 50% stronger, and retains its strength after extended exposure to 200 C, which is 0.5 times its homologous temperature. These findings reveal an alternative solution to obtaining lightweight metals critically needed for future energy efficiency and fuel savings.
High strain rate micromechanical testing can assist researchers in elucidating complex deformation mechanisms in advanced material systems. In this work, the interactions of atomic-scale chemistry and strain rate in affecting the deformation response of a Zr-based metallic glass was studied by varying the concentration of oxygen dissolved into the local structure. Compression of micropillars over six decades of strain rate uncovered a remarkable reversal of the strain rate sensitivity from negative to positive above ~ 5 s−1 due to a delocalisation of shear transformation events within the pre-yield linear regime for both samples, while a higher oxygen content was found to generally decrease the strain rate sensitivity effect. It was also identified that the shear band propagation speed increases with the actuation speed, leading to a transition in the deformation behaviour from serrated to apparent non-serrated plastic flow at ~ 5 s−1.
Graphic abstract
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.