In this study, the analysis of the elastic and elasto-plastic stresses on the cross section of a composite laminate with circular hole subjected to in-plane loads is performed. The laminate with a circular hole is subjected to a uniform axial planar load along one edge where no load is exerted along the hole edge. Aluminum metal-matrix composite laminate is composed of four orthotropic plates oriented with different angles in the symmetric and anti-symmetric manner. The elastic and elastoplastic stresses are analyzed with the Finite Element Method (FEM) by means of a program developed with FORTRAN. By the end of the analysis the retained stresses due to yield of the composite laminate are evaluated and the results of the applications are compared.KEY WORDS: elasto-plastic stress, orthotropic composite material, finite elements method.
In this study, four different bushing applications of carbon-epoxy pre-preg laminated composite plates were investigated experimentally and theoretically. The bushings in composite specimens on which the applications were conducted were loaded perpendicular to their plane, and the strength of the assembly was investigated in this way. These applications were compared by using the results of the experiments. The methodology of bushing application was determined for the most durable assembly. The generated finite element model for different bushing assemblies provided contribution for designing process in finite element analysis. While MSC/PATRAN was used for the finite element model generation, MSC/NASTRAN was applied for the finite element analysis.
Çok makinalı güç sistemlerinin sürekli, ekonomik ve güvenilir olarak çalışmasında benzetim programları yardımı ile kararlılık analizleri incelenmektedir. Güç sistemlerinde en yaygın olarak yapılan kararlılık analizi küçük sinyal kararlılığıdır. Bu çalışmada çalışmasında 4 makinalı 2 alanlı test sisteminde farklı generatör denetleyici modelleri ile küçük sinyal kararlılığı analizi incelenmiştir. Farklı generatör denetleyici modelleri olarak Güç Sistem Kararlı Kılıcısı Denetleyicisi (GSKK), Otomatik Gerilim Regülatörü (OGR) ve Türbin Yöneticisi (TY) kullanılmıştır. Benzetim çalışması Güç Sistemleri Analiz Programı (PSAT)’da gerçekleştirilmiştir. Senkron generatörde denetleyicilerin olmadığı durum ile GSKK, OGR ve TY modellerinin olduğu durumların karşılaştırmaları yapılmıştır. Karşılaştırmalar şekiller ve tablolar halinde verilmiştir. Bu çalışmada GSKK, OGR ve TY modellerinin senkron generatörde kullanılması sistemin kısa süre içerisinde kararlı hale geldiği, parametrelerdeki salınımların azaldığı ve sistemin küçük sinyal kararlılığı açısından daha etkili sonuçlar verdiği görülmüştür.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.