This paper discusses the application and adaptation of two existing operational algorithms for land surface emissivity (ε) retrieval from different operational satellite/airborne sensors with bands in the visible and near-infrared (VNIR) and thermal IR (TIR) regions: 1) the temperature and emissivity separation algorithm, which retrieves ε only from TIR data and 2) the normalized-difference vegetation index thresholds method, in which ε is retrieved from VNIR data.

The surface urban heat island (SUHI) effect is defined as the increased surface temperatures in urban areas in contrast to cooler surrounding rural areas. In this article, the evaluation of the SUHI effect in the city of Madrid (Spain) from thermal infrared (TIR) remote-sensing data is presented. The data were obtained from the framework of the Dual-use European Security IR Experiment (DESIREX) campaign that was carried out during June and July 2008 in Madrid. The campaign combined the collection of airborne hyperspectral and in situ measurements. Thirty spectral and spatial high-resolution images were acquired with the Airborne Hyperspectral Scanner (AHS) sensor in a 11, 21, and 4 h UTC scheme. The imagery was used to retrieve the SUHI effect by applying the temperature and emissivity separation (TES) algorithm. The results show a nocturnal SUHI effect with a highest value of 5 K. This maximum value agrees within 1 K with the highest value of the urban heat island (UHI) observed using air temperature data (AT). During the daytime, this situation is reversed and the city becomes a negative heat island.

No abstract

Abstract:Remote sensing has long been a useful tool in global applications, since it provides physically-based, worldwide, and consistent spatial information. This paper discusses the potential of using these techniques in the research field of water management, particularly for 'Water Footprint' (WF) studies. The WF of a crop is defined as the volume of water consumed for its production, where green and blue WF stand for rain and irrigation water usage, respectively. In this paper evapotranspiration, precipitation, water storage, runoff and land use are identified as key variables to potentially be estimated by remote sensing and used for WF assessment. A mass water balance is proposed to calculate the volume of irrigation applied, and green and blue WF are obtained from the green and blue evapotranspiration components. The source of remote sensing data is described and a simplified example is included, which uses evapotranspiration estimates from the geostationary satellite Meteosat 9 and precipitation estimates obtained with the Climatic Prediction Center Morphing Technique (CMORPH). The combination of data in this approach brings several limitations with respect to discrepancies in spatial and temporal resolution and data availability, which are discussed in detail. This work provides new tools for global WF assessment and represents an innovative approach to global irrigation mapping, enabling the estimation of green and blue water use. OPEN ACCESSRemote Sens. 2010, 2 1178

In this paper, a methodology using a single-channel and a twochannel method is presented to estimate the land surface temperature from the DAIS (Digital Airborne Imaging Spectrometer) thermal channels 74 (8.747 mm), 75 (9.648 mm), 76 (10.482 mm), 77 (11.266 mm), 78 (11.997 mm) and 79 (12.668 mm). The land surface temperature retrieved with both methods has been validated over the Barrax site (Albacete, Spain) in the framework of the DAISEX (Digital Airborne Imaging Spectrometer Experiment) field campaigns. Prior to the validation an analysis of the DAIS data quality has been performed in order to check the agreement between in situ data and the values extracted from the DAIS images supplied by the DLR (German Optoelectronic Institute). Suitable differences between in situ and DAIS data have been found. To solve this problem a linear re-calibration of the DAIS thermal channels has been applied using two ground calibration points (bare soil and water). For the land surface temperature retrieved, rms deviations of 0.96 K using a singlechannel method and 1.46 K using a two-channel method with the DAIS thermal channels 77 and 78 have been obtained considering re-calibrated data.