In this contribution, an ultrawideband (UWB) microwave system for breast cancer detection is presented. The system is based on a novel hemispherical real-aperture antenna array, which is employed in a multi-static radar-based detection system. The array consists of 16 UWB aperture-coupled stacked-patch antennas located on a section of a hemisphere. The radar system is designed to be used with realistic three-dimensional (3D) breast phantoms, which have been developed, as well as with real breast cancer patients during initial clinical trials. Images are formed using two different beamforming algorithms and the performance of these algorithms is firstly compared through numerical simulation. Experimental results for the same beamforming techniques are then presented, demonstrating the successful detection of 4 and 6 mm diameter spherical tumors in the curved breast phantom.

In this paper, we present four purely textile patch antennas for Bluetooth applications in wearable computing using the frequency range around 2.4 GHz. The textile materials and the planar antenna shape provide a smooth integration into clothing while preserving the typical properties of textiles. The four antennas differ in the deployed materials and in the antenna polarization, but all of them feature a microstrip line as antenna feed. We have developed a manufacturing process that guarantees unaffected electrical behavior of the individual materials when composed to an antenna. Thus, the conductive textiles possess a sheet resistance of less than 1 in order to keep losses at a minimum. The process also satisfies our requirements in terms of accuracy meeting the Bluetooth specifications. Our investigations not only characterize the performance of the antennas in planar shape, but also under defined bending conditions that resemble those of a worn garment. We show that the antennas can withstand clothing bends down to a radius of 37.5 mm without violating specifications.

General rightsThis document is made available in accordance with publisher policies. Please cite only the published version using the reference above. The development of flat, compact beam-steering devices with no bulky moving parts is opening up a new route to a variety of exciting applications, such as LIDAR scanning systems for autonomous vehicles, robotics and sensing, freespace, and even surface wave optical signal coupling. In this paper, the design, fabrication and characterization of innovative, nonvolatile, and reconfigurable beam-steering metadevices enabled by a combination of optical metasurfaces and chalcogenide phase-change materials is reported. The metadevices reflect an incident optical beam in a mirror-like fashion when the phase-change layer is in the crystalline state, but reflect anomalously at predesigned angles when the phase-change layer is switched into its amorphous state. Experimental angleresolved spectrometry measurements verify that fabricated devices perform as designed, with high efficiencies, up to 40%, when operating at 1550 nm. Laserinduced crystallization and reamorphization experiments confirm reversible switching of the device. It is believed that reconfigurable phase-change-based beam-steering and beam-shaping metadevices, such as those reported here, can offer real applications advantages, such as high efficiency, compactness, fast switching times and, due to the nonvolatile nature of chalcogenide phasechange materials, low power consumption.

Abstract-A new ultrawideband (UWB) textile antenna designed for UWB wireless body area network (WBAN) applications is presented. Unlike previous textile antennas, these antennas offer a direct integration into clothing due to a very small thickness (0.5 mm) and flexibility. We have realized two different designs of textile antennas: coplanar waveguide fed printed UWB disc monopole and UWB annular slot antenna. To our knowledge, these are the first textile UWB antennas reported in the open literature. Measured return loss and radiation pattern characteristics of textile UWB antennas agree well with simulations. Moreover, measured transfer functions show that these textile antennas possess excellent transient characteristics, when operating in free space as well as on the human body. They can operate in the entire UWB band approved by the Federal Communications Commission (3.1-10.6 GHz).Index Terms-Body area networks, textile antennas, ultrawideband (UWB).

Abstract-This paper presents a novel small-size directional antenna design for ultrawide-band wireless body area networks/wireless personal area networks applications. The design is based on a typical slot antenna structure with an added reflector in order to achieve directionality. The effects of different antenna parameters and human body proximity on the radiation characteristics are analyzed. Antenna measurements with an optic RF setup were performed in order to characterize the small-size antenna far field radiation pattern. The different structural antenna parameters were optimized via extensive numerical simulations. Results show that for frequencies above 3.5 GHz, where the power front-to-back ratio of the directional antenna is greater than 10 dB, its impedance is nearly the same as in the free space. It is not the case neither for the omnidirectional slot antenna nor the monopole antenna next to the body. Between 3 and 6 GHz performance of the novel directional antenna, in terms of radiation efficiency and SAR values, is significantly improved compared to omnidirectional antenna designs.Index Terms-Body-worn antennas, human body, pulsed antennas, specific absorption rate (SAR), ultrawide-band (UWB), wearable antennas, wireless communication.