No abstract

The inhibition effect of the extract of galbanum (Ferula gummosa Boiss.) on the corrosion of 304 stainless steel in 2 M HCl solution was studied by weight loss measurements, Tafel polarization, and electrochemical impedance spectroscopy (EIS) methods. It was found that the inhibition efficiency (IE) increases as the extract concentration is increased. Tafel polarization method revealed the mixed mode inhibition of galbanum extract (GE) with predominant control of anodic reaction. The effect of temperature on the corrosion behavior of steel indicates that inhibition efficiency of the natural substance increases with the rise in temperature. At all temperatures, the adsorption of the extract components onto the steel surface was found to follow the Temkin adsorption isotherm.

A sol-gel electrode and a coated wire ion-selective poly(vinyl chloride) membrane, based on thiosemicarbazone as a neutral carrier, were successfully developed for the detection of Cu (II) in aqueous solutions. The sol-gel electrode and coated electrode exhibited linear response with Nernstian slopes of 29.2 and 28.1 mV per decade respectively, within the copper ion concentration ranges 1.0 x 10(-5) - 1.0 x 10(-1) M and 6.0 x 10(-6) - 1.0 x 10(-1) M for coated and sol-gel sensors. The coated and sol-gel electrodes show detection limits of 3.0 x 10(-6) and 6.0 x 10(-6) M respectively. The electrodes exhibited good selectivities for a number of alkali, alkaline earth, transition and heavy metal ions. The proposed electrodes have response times ranging from 10-50 s to achieve a 95% steady potential for Cu2+ concentration. The electrodes are suitable for use in aqueous solutions over a wide pH range (4-7.5). Applications of these electrodes for the determination of copper in real samples, and as an indicator electrode for potentiometric titration of Cu2+ ion using EDTA, are reported. The lifetimes of the electrodes were tested over a period of six months to investigate their stability. No significant change in the performance of the sol-gel electrode was observed over this period, but after two months the coated wire copper-selective electrode exhibited a gradual decrease in the slope. The selectivity of the sol-gel electrode was found to be better than that of the coated wire copper-selective electrode. Based on these results, a novel sol-gel copper-selective electrode is proposed for the determination of copper, and applied to real sample assays.

No abstract