We present a simple method for the elimination of cracks in GaN layers grown on Si (111). Cracking of GaN on Si usually occurs due to large lattice and thermal mismatch of GaN and Si when layer thicknesses exceeds approximately 1 µm. By introducing thin, low-temperature AlN interlayers, we could significantly reduce the crack density of the GaN layer. The crack density is practically reduced to zero from an original crack density of 240 mm-2 corresponding to crack-free regions of 3×10-3 mm2. Additionally for the GaN layer with low temperature interlayers, the full width at half maximum X-ray (2024) rocking curve is improved from approximately 270 to 65 arcsec.

Self-heating effects and temperature rise in AlGaN/GaN HEMTs grown on silicon and sapphire substrates are studied, exploiting transistor dc characterization methods. A negative differential output resistance is observed for high dissipated power levels. An analytical formula for a source-drain current drop as a function of parasitic source resistance and threshold voltage changes is proposed to explain this behavior. The transistor source resistance and threshold voltage is determined experimentally at different elevated temperatures to construct channel temperature versus dissipated power transfer characteristic. It is found that the HEMT channel temperature increases rapidly with dissipated power and at 6 W/mm reaches values of 320 C for sapphire and 95 C for silicon substrate, respectively.

No abstract

Nanoscience by an authorized administrator of DigitalCommons@University of Nebraska -Lincoln. Darakchieva, V.; Paskova, T.; Schubert, Mathias; Arwin, H.; Paskov, P.P.; Monemar, B.; Hommel, D.; Heuken, M.; Off, J.; Scholz, F.; Haskell, B.A.; Fini, P.T.; Speck, J.S.; and Nakamura, S., "Anisotropic strain and phonon deformation potentials in GaN" (2007

We present an electroluminescence test structure which consists of an InGaN/GaN multiquantum well as active region on the top of an AlGaN/GaN multilayer grown by metalorganic vapor phase epitaxy on Si(111) substrate. The integral room-temperature electroluminescence spectrum reveals a peak emission wavelength of 467 nm and a significantly higher brightness than an identical reference structure on sapphire substrate. In microelectroluminescence imaging, two emission peaks at 465 and 476 nm can be separated originating from locally different areas of the diode. Cathodoluminescence measurements in cross section and high-resolution x-ray diffraction measurements show that the structure is less strained than a sample without the AlGaN/GaN multilayer. The AlGaN/GaN multiple layer sequence which has a total thickness of 1.5 μm causes lattice relaxation during growth after a thickness of around 0.9 μm as directly visualized by cathodoluminescence line scans across the diode.