No abstract

Praseodymium-doped ZrO 2 photoluminescent (PL) powders have been prepared by a co-precipitation process. Different doping concentrations in the start mixture and annealing temperatures for the precipitated were studied. It is observed that the crystalline structure and the crystallinity of the powders depend on the annealing temperature. For temperatures higher than 750˚C, the material presents the monoclinic phase with an average crystalline grain size of 100 nm. Measurements on photoluminescence show excitation and emission spectra. For an excitation wavelength of 294 nm, all the PL emission spectra show the peaks located at 490

The spray pyrolysis technique has been extensively used to synthesize materials for a wide variety of applications such as micro and sub-micrometer dimension MOSFET´s for integrated circuits technology, light emitting devices for displays, and solid-state lighting, planar waveguides and other multilayer structure devices for photonics. This technique is an atmospheric pressure chemical synthesis of materials, in which a precursor solution of chemical compounds in the proper solvent is sprayed and converted into powders or films through a pyrolysis process. The most common ways to generate the aerosol for the spraying process are by pneumatic and ultrasonic systems. The synthesis parameters are usually optimized for the materials optical, structural, electric and mechanical characteristics required. There are several reviews of the research efforts in which spray pyrolysis and the processes involved have been described in detail. This review is intended to focus on research work developed with this technique in relation to high-K dielectric and luminescent materials in the form of coatings and powders as well as multiple layered structures.

No abstract

ZrO2 : Pr films were synthesized by the ultrasonic spray pyrolysis process. X-ray diffraction studies, as a function of the deposition temperature, indicate a tetragonal crystal structure of zirconia as the substrate temperature was increased. Luminescence (photo- and cathodoluminescence) properties of the films were studied as a function of growth parameters such as the substrate temperature and the praseodymium concentration. For an excitation wavelength of 290 nm, all the photoluminescent emission spectra show peaks located at 490, 510, 566, 615, 642, 695, 718, 740 and 833 nm, associated with the electronic transitions 3 P0 → 3H4, 3P0 → 3 H4, 3P1 + 1I6 → 3H5, 1D2 → 3H4, 3 P0 → 3H6, 1D2 → 3 H5, 1D2 → 3H5, 3 P0 → 3F3,4 and 1D2 → 3 F2 of the Pr3+ ion. As the deposition temperature is increased, an increasing intensity of the luminescence emission is observed. Also, quenching of the luminescence, with increasing doping concentration, is observed. The chemical composition of the films as determined by energy dispersive spectroscopy is reported as well. In addition, the surface morphology characteristics of the films, as a function of the deposition temperature, are presented.