The implementation of a first-generation CELL processor that supports multiple operating systems including Linux consists of a 64b power processor element (PPE) and its L2 cache, multiple synergistic processor elements (SPE) [1] that each has its own local memory (LS) [2], a high-bandwidth internal element interconnect bus (EIB), two configurable non-coherent I/O interfaces, a memory interface controller (MIC), and a pervasive unit that supports extensive test, monitoring, and debug functions. The high level chip diagram is shown in Fig. 10.2.1. The key attributes include hardware content protection, virtualization and realtime support combined with extensive single-precision floatingpoint capability. By extending the Power architecture with SPE having coherent DMA access to system storage and with multioperating-system resource-management, CELL supports concurrent real-time and conventional computing. With a dual-threaded PPE and 8 SPEs this implementation is capable of handling 10 simultaneous threads and over 128 outstanding memory requests. Figure 10.2.7 shows the die micrograph with roughly 234M transistors from 17 physical entities and 580k repeaters and 1.4M nets implemented in 90nm SOI technology with 8 levels of copper interconnects and one local interconnect layer. At the center of the chip is the EIB composed of four 128b data rings plus a 64b tag operated at half the processor clock rate. The wires are arranged in groups of four, interleaved with GND and VDD shields twisted at the center to reduce coupling noise on the two unshielded wires. To ensure signal integrity, over 50% of global nets are engineered with 32k repeaters. The SoC uses 2965 C4s with four regions of different row-column pitches attached to a low-cost organic package. This structure supports 15 separate power domains on the chip, many of which overlap physically on the die. The processor element design, power and clock grids, global routing, and chip assembly support a modular design in a building-block-like construction.The chip contains 3 distinct clock-distribution systems, each sourced by an independent PLL, to support processor, bus interface, and memory-interface requirements. The main high-frequency clock grid covers over 85% of the chip, delivering the clock signal to processors and miscellaneous circuits. Second and third clock grids, each operating at fractions of the main clock signal, are interleaved with the main clock-grid structure, creating multiple clock frequency islands within the chip. All clock grids are constructed on the lowest impedance final two layers of metal, and are supported by a matrix of over 850 individually tuned buffers. This enables control of the clock-arrival times and skews, especially on the main clock grid that supports regions of widely varying clock-load densities. High-frequency clock-signal distribution optimization and verification rely on wire simulation models that includes frequency-sensitive inductance and resistance phenomena. As shown in Fig. 10.2.2, final worst-case clock skew ac...

No abstract

This paper reviews the design challenges that current and future processors must face with stringent power limits and high frequency targets, and the design methods required to address the continuing system integration trends. This paper then describes the implementation of a first-generation CELL processor and the design methods used to overcome the above challenges. A CELL Processor consists of a 64 bit Power Architecture processor coupled with multiple synergistic processors, a flexible IO interface, and a memory interface controller that supports multiple operating systems including Linux. This multi-core SoC, implemented in 90nm SOI technology, achieved a high clock rate by maximizing custom circuit design while maintaining reasonable complexity through design modularity and reuse.

No abstract

The first generation Cell Broadband Engine processor introduced the Cell Architecture that consists of nine processor cores fabricated in the 90nm CMOS SOI technology. This paper describes the advances made by moving the Cell Broadband Engine design from 90nm CMOS SOI to 65nm CMOS SOI.