As a widely accepted concept, bitumen consists of four fractions that can be distinguished by their polarity. Highly polar asphaltene micelles are dispersed in a viscous phase of saturates, aromatics and resins (maltene phase). Different concentrations of asphaltenes in the bitumen result in a range of mechanical response properties. In an interdisciplinary study the impact of the maltene phase and asphaltenes on the linear viscoelastic behavior and the microstructure of bitumen were analyzed by creep recovery testing in a DSR and by atomic force microscopy (AFM). Therefore, bitumen was separated into the maltene and asphaltene fractions and artificial bitumen samples with different, pre-defined asphaltene concentrations were produced and investigated. It was found that the artificially produced, precipitated bitumen samples can be regarded as a representative, bitumen-like material in terms of mechanical behavior and microstructure. Asphaltenes play an important role in the typical viscoelastic behavior of bitumen being mainly responsible for stiffness and elasticity. Also, their concentration appears to be correlated to the occurrence and shape of the bee-like inclusions which can be typically observed by AFM.
Five bituminous samples were carefully studied by confocal laser scanning microscopy using 488 nm excitation radiation and observing 500-530 nm of emission. The images revealed the microstructure of bitumen. The influence of the admixture of mineral aggregates concerning the microstructure was tested. For the minerals, no significant influence was found. For understanding the origin of fluorescent signals, the samples were separated into asphaltenes and maltenes and analyzed with fluorescence spectroscopy. Although former works have assumed the origin of fluorescent emissions in bitumen to be found in the asphaltene fraction, the asphaltenes produce little to no emissions, but the maltenes exhibit strong fluorescence in the observed spectral region. For deeper insight, fractionation of the bitumina into the SARA fractions by chromatographic column separation was necessary. The fluorescence spectra of these fractions were analyzed and revealed the aromatics and resin phases to be the only components capable of sufficiently intense fluorescent emission. This is a strong argument for a complex internal microstructure consisting of a mantle of aromatics surrounding an inner core.
Extracellular bone material can be characterised as a nanocomposite where, in a liquid environment, nanometre-sized hydroxyapatite crystals precipitate within as well as between long fibre-like collagen fibrils (with diameters in the 100 nm range), as evidenced from neutron diffraction and transmission electron microscopy. Accordingly, these crystals are referred to as ‘interfibrillar mineral’ and ‘extrafibrillar mineral’, respectively. From a topological viewpoint, it is probable that the mineralisations start on the surfaces of the collagen fibrils (‘mineral-encrusted fibrils’), from where the crystals grow both into the fibril and into the extrafibrillar space. Since the mineral concentration depends on the pore spaces within the fibrils and between the fibrils (there is more space between them), the majority of the crystals (but clearly not all of them) typically lie in the extrafibrillar space. There, larger crystal agglomerations or clusters, spanning tens to hundreds of nanometers, develop in the course of mineralisation, and the micromechanics community has identified the pivotal role, which this extrafibrillar mineral plays for tissue elasticity. In such extrafibrillar crystal agglomerates, single crystals are stuck together, their surfaces being covered with very thin water layers. Recently, the latter have caught our interest regarding strength properties (Fritsch et al. 2009 J Theor Biol. 260(2): 230–252) – we have identified these water layers as weak interfaces in the extrafibrillar mineral of bone. Rate-independent gliding effects of crystals along the aforementioned interfaces, once an elastic threshold is surpassed, can be related to overall elastoplastic material behaviour of the hierarchical material ‘bone’. Extending this idea, the present paper is devoted to viscous gliding along these interfaces, expressing itself, at the macroscale, in the well-known experimentally evidenced phenomenon of bone viscoelasticity. In this context, a multiscale homogenisation scheme is extended to viscoelasticity, mineral-cluster-specific creep parameters are identified from three-point bending tests on hydrated bone samples, and the model is validated by statistically and physically independent experiments on partially dried samples. We expect this model to be relevant when it comes to prediction of time-dependent phenomena, e.g. in the context of bone remodelling.
Bitumen is a widely used material, but its aging behavior is only understood at a macroscopic level as hardening and embrittlement over time. To assess bitumen aging behavior in the long run, the pressure aging vessel (PAV) testing procedure was developed. However, this procedure including high-pressure and high-temperature oxidation of the bitumen has not yet been understood on a molecular level. Here, a bitumen sample and its SARA fractions, i.e., saturates, aromatics, resins, and asphaltenes, were investigated in comparison with their aged samples to study changes of their chemical compositions. Negative electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry [ESI(−)] FT-ICR-MS was used to analyze samples. The effect of aging was characterized using the aromaticity equivalent (X c), double bond equivalent (DBE), and van Krevelen plots. It was found that aging induces reduction of condensed aromatic compounds to alicyclic and open chain aliphatic compounds, while small aromatic compounds have been found to be relatively stable (or altered only slightly). Abundant alterations were detected in unaged bitumen. These changes can be assigned to resins and asphaltenes as compared to saturates and aromatics. Overall, alterations of highly condensed compounds were found to be related to aging. Furthermore, molecular series of CHO, CHNO, and CHOS fragments were more susceptible to oxygenation in bitumen, aromatics, resins, and asphaltenes as compared to saturates. In addition, molecular changes in asphaltenes showed a significant difference from classical assessment with high content of condensed aromatic compounds. Rather, the most abundant compounds in asphaltenes appear to be more saturated and apolar.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.