No abstract

The highly dynamic processes within a hillslope-riparian-stream (HRS) continuum are known to affect streamflow generation, but are yet not fully understood. Within this study, we simulated a headwater HRS continuum in western Luxembourg with an integrated hydrologic surface subsurface model (HydroGeoSphere). The model was setup with thorough consideration of catchment-specific attributes and we performed a multicriteria model evaluation (4 years) with special focus on the temporally varying spatial patterns of surface saturation. We used a portable thermal infrared (TIR) camera to map surface saturation with a high spatial resolution and collected 20 panoramic snapshots of the riparian zone (approx. 10 m 3 20 m) under different hydrologic conditions. Qualitative and quantitative comparison of the processed TIR panoramas and the corresponding model output panoramas revealed a good agreement between spatiotemporal dynamic model and field surface saturation patterns. A double logarithmic linear relationship between surface saturation extent and discharge was similar for modeled and observed data. This provided confidence in the capability of an integrated hydrologic surface subsurface model to represent temporal and spatial water flux dynamics at small (HRS continuum) scales. However, model scenarios with different parameterizations of the riparian zone showed that discharge and surface saturation were controlled by different parameters and hardly influenced each other. Surface saturation only affected very fast runoff responses with a small volumetric contribution to stream discharge, indicating that the dynamic surface saturation in the riparian zone does not necessarily imply a major control on runoff generation.

In this commentary, we summarize and build upon discussions that emerged during the workshop "Isotopebased studies of water partitioning and plant-soil interactions in forested and agricultural environments" held in San Casciano in Val di Pesa, Italy, in September 2017. Quantifying and understanding how water cycles through the Earth's critical zone is important to provide society and policymakers with the scientific background to manage water resources sustainably, especially considering the ever-increasing worldwide concern about water scarcity. Stable isotopes of hydrogen and oxygen in water have proven to be a powerful tool for tracking water fluxes in the critical zone. However, both mechanistic complexities (e.g. mixing and fractionation processes, heterogeneity of natural systems) and methodological issues (e.g. lack of standard protocols to sample specific compartments, such as soil water and xylem water) limit the application of stable water isotopes in critical-zone science. In this commentary, we examine some Published by Copernicus Publications on behalf of the European Geosciences Union. 6400 D. Penna et al.: Tracing terrestrial ecosystem water fluxes using stable isotopes of the opportunities and critical challenges of isotope-based ecohydrological applications and outline new perspectives focused on interdisciplinary research opportunities for this important tool in water and environmental science.

Abstract:Information on the main drivers of subsurface flow generation on hillslopes of alpine headwater catchments is still missing. Therefore, the dominant factors controlling the water table response to precipitation at the hillslope scale in the alpine Bridge Creek Catchment, Northern Italy, were investigated. Two steep hillslopes of similar size, soil properties and vegetation cover but contrasting topography were instrumented with 24 piezometric wells. Sixty-three (63) rainfall-runoff events were selected over three years in the snow-free months to analyse the influence of rainfall depth, antecedent moisture conditions, hillslope topographic characteristics and soil depth on shallow water table dynamics. Piezometric response, expressed as percentage of well activation and water peak magnitude, was strongly correlated with soil moisture status, as described by an index combining antecedent soil moisture and rainfall depth. Hillslope topography was found to be a dominant control only for the convex-divergent hillslope and during wet conditions. Timing of water table response depended primarily on soil depth and topographic position, with piezometric peak response occurring later and showing a greater temporal variability at the hillslope bottom, characterized by thicker soil. The relationship between mean hillslope water table level and standard deviation for all wells reflected the timing of the water table response at the different locations along the hillslopes. The outcomes of this research contribute to a better understanding of the controls on piezometric response at the hillslope scale in steep terrain and its role on the hydrological functioning of the study catchment and of other sites with similar physiographic characteristics.

Abstract. Recent studies have called for a new unifying hydrological theory at the hillslope and watershed scale, emphasizing the importance of coupled process understanding of the interactions between hydrology, ecology, pedology, geochemistry and geomorphology. The Biosphere 2 Hillslope Experiment aims at exploring how climate, soil and vegetation interact and drive the evolution of the hydrologic hillslope behavior using a set of three large-scale hillslopes (18 m by 33 m each) that will be built in the climate-controlled experimental biome of the Biosphere 2 facility near Tucson, Arizona, USA. By minimizing the initial physical complexity of these hillslopes, the spontaneous formation of flow pathways, soil spatial heterogeneity, surface morphology and vegetation patterns can be observed over time. This paper documents the hydrologic design process for the Biosphere 2 Hillslope Experiment, which was based on design principles agreed upon among the Biosphere 2 science community. Main design principles were that the hillslopes should promote spatiotemporal variability of hydrological states and fluxes, facilitate transient lateral subsurface flow without inducing overland flow and be capable of supporting vegetation. Hydrologic modeling was used to identify a hillslope configuration (geometry, soil texture, soil depth) that meets the design objectives. The recommended design for the hillslopes consists of a zero-order basin shape with a 10 degree overall slope, a uniform soil depth of 1 m and a loamy sand soil texture. The sensitivity of the hydrologic response of this design to different semi-arid climate scenarios was subsequently tested. Modeling results show that the timing of rainfall in relation to the timing of radiation input controls the spatiotemporal variability of moisture within the hillslope and the generation of lateral subsurface flow. The Biosphere 2 Hillslope Experiment will provide an excellent opportunity to test hypotheses, observe emergent patterns and advance the understanding of interactions.