This study had as objective to evaluate the effect of the substrate on the yield of lettuce grown in aquaponic and hydroponic systems. The study was conducted at the Federal University of Grande Dourados, located in Dourados, MS. A randomized complete block design was used, with three treatments and 16 replicates. The cultivation systems were analyzed independently. The substrates analyzed were: coconut shell fiber, phenolic foam and expanded vermiculite. The plants were grown in two systems (aquaponic and hydroponic), using the NFT (Nutrient Film Technique) system. The crop used was lettuce cv. ‘Alcione’. The parameters analyzed were: crop yield and percentage of roots per plant. In addition, macronutrient contents were analyzed in the leaves. The substrate composed of coconut shell fiber was more suitable for lettuce production, since it led to higher yields for both aquaponic (2.88 kg m-2) and hydroponic (2.58 kg m-2) systems. The use of phenolic foam as growing substrate led to lower mean crop yields in both production systems analyzed, 1.94 and 2.15 kg m-2 for aquaponic and hydroponic systems, respectively.
ABSTRACT:The integration of fish farming in intensive system and plant production, called "aquaponics" is practiced successfully in countries like the USA, Australia and Europe. In Brazil, this integration has attracted the attention of researchers and producers. In this context, the aim of this study was to evaluate the effect of two substrates (crushed stone number 3, CS III and flexible polyurethane foam, FPF) on the production of aquaponic lettuce, moreover, to show that the residual water from intensive tilapia production provides sufficient qualitative characteristics for competitive production of lettuce without adding commercial fertilizers. The treatment in which FPF was used provided higher concentrations of macro and micronutrients in the shoots, higher production of fresh matter of shoots (95.48 g plant -1 ) and a larger number of leaves (14.90) relative to CS III. These results were attributed to the lower post-transplanting stress and the higher water retention time provided by the FPF. The residual water from tilapia intensive farming can provide sufficient nutrients for the production of lettuce, making the supplementary fertilization with commercial products unnecessary. Thus, the FPF presents the most suitable conditions to be used as substrate in aquaponics system with recirculation of the residual water from the intensive tilapia farming. KEYWORDS: soilless cultivation, water recirculation and aquaponics system EFEITO DE DIFERENTES SUBSTRATOS NA PRODUÇÃO DE ALFACE AQUAPÔNICA ASSOCIADA À CRIAÇÃO INTENSIVA DE TILÁPIA COM RECIRCULAÇÃO DE ÁGUA RESUMO:A integração entre a criação de peixes em sistema intensivo e a produção vegetal, denominada "aquaponia", é praticada com sucesso em países como Estados Unidos, Austrália e também, na Europa. No Brasil, essa integração vem atraindo a atenção de pesquisadores e produtores. Nesse contexto, o objetivo deste trabalho foi avaliar o efeito de dois substratos (pedra brita número 3, PB3 e espuma flexível de poliuretano, EFP) sobre a produção de alface aquapônica, além disso, demonstrar que a água residuária proveniente da produção intensiva de tilápia proporciona características qualitativas suficientes para produção competitiva de alface sem adição de fertilizantes comerciais. O tratamento onde foi utilizada EFP proporcionou maiores concentrações de macro e micronutrientes na parte aérea das plantas, maior produção de massa fresca da parte aérea (95,48 g planta -1 ) e maior número de folhas (14,90) em relação à PB3. Esses resultados foram atribuídos ao menor estresse pós-transplantio e ao maior tempo de retenção de água proporcionado pela EFP. A água residuária proveniente da criação intensiva de tilápia pode fornecer nutrientes suficientes para produção de alface, não sendo necessário complementação da fertilização com produtos comerciais. Assim, a EFP apresenta condições mais adequadas para ser utilizada como substrato, em sistema aquapônico, com recirculação de água residuária proveniente da criação intensiva de tilápia. PALAVRAS-CHAVE:cultivo sem solo, ...
RESUMO Objetivou-se, com este estudo, avaliar o efeito de diferentes tensões da água no solo sobre a produção de duas cultivares de cenoura irrigadas por gotejamento. O experimento foi conduzido em Lavras, Minas Gerais (21º 14' S, 45º 00' W e 918,8 m), no período de julho a outubro de 2010. O delineamento experimental utilizado foi em blocos casualizados, em esquema fatorial 2 x 6, com quatro repetições. Os tratamentos se constituíram de duas cultivares de cenoura, cultivar não híbrida Nantes e cultivar hibrida Nayarit F1, além de seis níveis críticos de tensão da água no solo, 15, 25, 35, 45, 60 e 75 kPa. Com os resultados concluiu-se que o híbrido Nayarit F1 apresentou melhores respostas com relação às seguintes características analisadas: produtividade total de raízes, produtividade de raízes comerciais, massa média de raízes comerciais e eficiência no uso da água. Visando à obtenção de maiores produtividades de raízes (total e comercial) e maior massa média de raízes comerciais, em ambas as cultivares, deve-se irrigar no momento em que a tensão da água no solo estiver em torno de 15 kPa na profundidade de 0,15 m. O valor mínimo encontrado para a raízes do tipo refugo ocorreu na tensão de 21 kPa, resultando em um valor mínimo de massa raiz de 41,67g.
RESUMOO presente trabalho relata as técnicas e os métodos adotados no desenvolvimento do aplicativo IRRIGAR usando programação orientada a objeto utilizando-se o compilador Microsoft Visual Basic for Applications 8.0 (VBA), um programa específico para a elaboração de projetos de irrigação por aspersão convencional que tem o propósito de facilitar o dimensionamento econômico de sistemas que utilizam energia elétrica da rede de distribuição de concessionárias brasileiras. O aplicativo oferece suporte para o dimensionamento agronômico e operacional do sistema e permite à definição do layout de irrigação. As perdas de carga contínuas são determinadas pela equação universal de Darcy-Weissbach e as localizadas estimadas ou calculadas pelo método direto. As linhas laterais são dimensionadas pelo critério da máxima perda de carga permitida e as demais linhas do sistema pela análise de custos com auxílio da equação de Bresse. Este Programa é uma ferramenta que pode ser utilizada como contribuição direta para melhoria da eficiência econômica dos sistemas de irrigação por aspersão convencional, ajudando a viabilizar a utilização desse método na agricultura e o aproveitamento racional dos insumos envolvidos.Palavras-chave: projeto, agricultura, tecnologia, simulação, eficiência econômica.ABSTRACT 1 Eng. Agrônomo, Docente do Programa de Pós-Graduação em Engenharia Agrícola da UFGD, Dourados, MS.
A B S T R A C TIn the aquaponic system, the characteristics of the materials used as substrate directly affect plant development, because besides acting as a support base, they must present a surface to fix microorganisms, responsible for the conversion of nutrients into forms more easily available to plants. Thus, the objective of this study was to evaluate the effect of four growing substrates on the yield of lettuce grown in aquaponic system. The experimental design was randomized blocks with four treatments, which corresponded to the substrates, and six replicates. Plants were grown using the nutrient film technique (NFT) system. The substrates used in the experiment were: coconut shell fiber with crushed stone #3, expanded vermiculite, zeolite and phenolic foam. The treatment with phenolic foam was considered as the least suitable for lettuce cultivation in aquaponic system, because it caused lower yield (20.8 t ha -1 ). The treatment using coconut shell fiber with crushed stone #3 was considered as the most adequate, since it led to higher yield (39.9 t ha -1 ) compared with the other substrates analyzed.Produtividade da alface cultivada em sistema aquapônico sob diferentes substratos R E S U M O No sistema de aquaponia as características dos materiais utilizados como substrato afetam diretamente no desenvolvimento das plantas, pois além de atuarem como base de sustentação, devem apresentar uma superfície para fixação de microrganismos, responsáveis pela conversão de nutrientes para formas mais facilmente disponíveis para plantas. Assim, o objetivo desta pesquisa foi avaliar o efeito de quatro substratos de cultivo sobre a produtividade da alface cultivada em sistema de aquaponia. O delineamento experimental utilizado foi em blocos ao acaso, com quatro tratamentos que corresponderam aos substratos e seis repetições. O cultivo das plantas foi realizado utilizando o sistema do tipo NFT (Nutrient Film Technique). Os substratos utilizados no experimento foram: fibra de casca de coco com brita número 3, vermiculita expandida, zeólita e espuma fenólica. O tratamento em que se utilizou espuma fenólica foi considerado o menos adequado para o cultivo da alface em sistema aquapônico, pois apresentou menor produtividade (20,8 t ha -1 ). O tratamento em que se utilizou fibra de casca de coco com brita número 3 foi considerado o mais adequado, uma vez que proporcionou maior produtividade (39,9 t ha -1 ) em relação aos demais substratos analisados.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.