The aim of this study was to investigate the biomechanical behaviour of maxillary premolar teeth regarding root morphology and abfraction depth, submitted to axial and oblique occlusal load. The investigation was conducted using 3D finite element analysis and strain gauge test. Sound maxillary premolar single and double root were selected for 3D model generation. The teeth were scanned for external morphology data acquisition. The 3D geometry was stored in *.STL and exported to Bio-CAD software (Rhinoceros-3D) to model generation. Mesh generation, mechanical properties and boundary conditions were performed in finite element software (Femap, Noran Engineering, USA). Twelve models were generated: sound tooth, 1.25 and 2.5 mm abfraction teeth. 100N compressive static load was applied: axially and 45° angle to the long axis on the palatine surface of the buccal cusp. Two strain gauges were bonded on the teeth mounted in a mechanical testing machine. Von Mises criterion showed that the double-root teeth associated with 2.5 mm abfraction and oblique loading presented higher stress values. Axial loading associated with single-root teeth propitiated the lowest stress rates. Double root sound 1.25 and 2.5 mm abfraction teeth associated with oblique loading showed the highest strain values (μS): 692.6, 1043.31 and 1236.14, respectively. Single root sound 1.25 and 2.5 mm abfraction teeth associated with oblique loading showed 467.10, 401.51 and 420.98 strain values, respectively. Axial loading showed lower strain rates, ranging from 136.12 to 366.91. The association of deep lesions, oblique loading and double-root tooth promoted higher stress and strain concentration.
O objetivo desta pesquisa foi comparar as alterações cefalométricas de pacientes com má oclusão de Classe II divisão 1, tratados com os aparelhos Jasper Jumper e Twin Force Bite Corrector, associados ao aparelho ortodôntico fixo. A amostra foi composta por 120 telerradiografias em norma lateral de 60 pacientes, os quais foram divididos em 3 grupos: Grupo Experimental 1, constituído por 20 pacientes com idade inicial média de 12,39 anos, tratados por meio do aparelho Jasper Jumper associado ao aparelho fixo, por um período médio de 2,42 anos; Grupo Experimental 2, contendo 20 pacientes com idade inicial média de 11,83 anos, tratados com o aparelho Twin Force associado ao aparelho fixo, com tempo médio de tratamento de 2,59 anos; Grupo Controle, composto por 20 jovens, com idade inicial média de 12,13 anos e observados por um período médio de 2,21 anos. As alterações foram comparadas entre os grupos, por meio da Análise de Variância e do teste de Tukey. Observou-se que ambos os tratamentos apresentaram um efeito restritivo na maxila, houve melhora significante da relação maxilomandibular nos dois protocolos de tratamento avaliados e promoveram rotação horária do plano oclusal. O grupo Jasper Jumper, promoveu uma significante limitação do desenvolvimento vertical dos molares superiores em relação aos outros grupos. Os incisivos inferiores exibiram maior protrusão e uma extrusão dos molares inferiores nos grupos 1 e 2. Ambos os aparelhos melhoraram significantemente a relação maxilomandibular, os trespasses horizontal, vertical e a relação molar. Os protocolos de tratamento promoveram retrusão dos lábios superiores. Palavras-chave: Má oclusão de Classe II. Propulsores mandibulares. Aparelho fixo.
A Deus pelo privilégio de uma vida cercada de amor, pessoas e oportunidades que tornaram isto possível.Gratidão eterna aos meus pais Azenira e Jorge por uma vida inteira de dedicação, paciência e amor.Agradecimento especial à minha mãe Alzenira, por ser minha maior inspiração.Por ser extraordinária. Rara.À minha irmã Larissa. Minha alma gêmea, melhor amiga e melhor companhia durante toda minha vida.A toda minha familia e amigos pelo amor e por comemorarem comigo cada conquista.Um agradecimento especial ao Arón, esse ser inexplicável e surpreendente. Meu melhor presente dessa jornada. Obrigada por tanto cuidado, paciência e amor. Amo você.Às grandes amigas que Bauru me deu. Deborah, Vanessa e Flávia. Vocês fazem parte das minhas melhores memórias.À minha turma de mestrado que foi excepcional.
Comparison of dentoalveolar, skeletal and soft tissue changes of the treatment of Class II malocclusion with three different intraoral distalization systems: Jones jig, Distal jet and First Class Comparação das alterações dentoalveolares, esqueléticas e de tecido mole no tratamento da má oclusão de Classe II com três diferentes sistemas de distalização intrabucal: Jones jig, Distal jet e First Class BAURU 2016 LORENA VILANOVA FREITAS DE SOUZA Comparison of dentoalveolar, skeletal and soft tissue changes of the treatment of Class II malocclusion with three different intraoral distalization systems: Jones jig, Distal jet and First Class Comparação das alterações dentoalveolares, esqueléticas e de tecido mole no tratamento da má oclusão de Classe II com três diferentes sistemas de distalização intrabucal: Jones jig, Distal jet e First Class Dissertação constituída por artigo apresentada à
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.