No abstract

Although there have been many decades of research and commercial presence on high performance general purpose processors, there are still many applications that require fully customized hardware architectures for further computational acceleration. Recently, deep learning has been successfully used to learn in a wide variety of applications, but their heavy computation demand has considerably limited their practical applications. This paper proposes a fully pipelined acceleration architecture to alleviate high computational demand of an artificial neural network (ANN) which is restricted Boltzmann machine (RBM) ANNs. The implemented RBM ANN accelerator (integrating network size, using 128 input cases per batch, and running at a 303-MHz clock frequency) integrated in a state-of-the art field-programmable gate array (FPGA) (Xilinx Virtex 7 XC7V-2000T) provides a computational performance of 301-billion connection-updates-per-second and about 193 times higher performance than a software solution running on general purpose processors. Most importantly, the architecture enables over 4 times (12 times in batch learning) higher performance compared with a previous work when both are implemented in an FPGA device (XC2VP70).

Long-Term Evolution in the Unlicensed Spectrum (LTE-U) is considered as an indispensable technology to mitigate the spectrum scarcity in wireless networks. Typical LTE transmissions are contentionfree and centrally controlled by the Base Station (BS). However, the wireless networks that work in unlicensed bands use contention-based protocols for channel access, which raise the need to derive an efficient and fair coexistence mechanism among different radio access networks. In this paper, we propose a novel mechanism based on neural networks for the coexistence of an LTE-U BS in the unlicensed spectrum alongside with WiFi access points. Specifically, we model the problem in coexistence as a 2-Dimensions Hopfield Neural Network (2D-HNN) based optimization problem that aims to achieve fairness considering both the LTE-U data rate and the QoS requirements of WiFi networks. Using the energy function of 2D-HNNs, precise investigation of its minimization property can directly provide the solution of the optimization problem. Furthermore, the problem of allocating the unlicensed resources to LTE-U users is modeled as a 2D-HNN and its energy function is leveraged to allocate resources to LTE-U users based on their channel states. Numerical results show that the proposed algorithm allows the LTE-U BS to work efficiently in the unlicensed spectrum while protecting the WiFi networks. Moreover, more than 90% fairness among the LTE-U users is achieved when allocating the unlicensed resources to LTE-U users based on the proposed algorithm.

Resistive random access memories (RRAMs) are a type of resistive memory with two metal electrodes and a semi-insulating switching material in-between. As the persistent technology node downscaling continues in transistor technologies, RRAM designers also face similar device scaling challenges in simple cross-point arrays. For this reason, a cost-effective 3D vertical RRAM (VRRAM) structure which requires a single pivotal lithography step is attracting significant attention from both the scientific community and the industry. Integrating an extremely thin plane electrode to such a structure is a difficult but necessary step to enable high memory density. In addition, experimentally verifying and modeling such devices is an important step to designing RRAM arrays with a high noise margin, low resistive-capacitive (RC) delays, and stable switching characteristics. In this work, we conducted an electromagnetic analysis on a 3D vertical RRAM with atomically thin graphene electrodes and compared it with the conventional metal electrode. Based on the experimental device measurement results, we derived a theoretical basis and models for each VRRAM design that can be further utilized in the estimation of graphene-based 3D memory at the circuit and architecture levels. We concluded that a 71% increase in electromagnetic field strength was observed in a 0.3 nm thick graphene electrode when compared to a 5 nm thick metal electrode. Such an increase in the field led to much lower energy consumption and fluctuation range during RRAM switching. Due to unique graphene properties resulting in improved programming behavior, the graphene-based VRRAM can be a strong candidate for stacked storage devices in new memory computing platforms.

People nowadays are entering an era of rapid evolution due to the generation of massive amounts of data. Such information is produced with an enormous contribution from the use of billions of sensing devices equipped with in situ signal processing and communication capabilities which form wireless sensor networks (WSNs). As the number of small devices connected to the Internet is higher than 50 billion, the Internet of Things (IoT) devices focus on sensing accuracy, communication efficiency, and low power consumption because IoT device deployment is mainly for correct information acquisition, remote node accessing, and longer-term operation with lower battery changing requirements. Thus, recently, there have been rich activities for original research in these domains. Various sensors used by processing devices can be heterogeneous or homogeneous. Since the devices are primarily expected to operate independently in an autonomous manner, the abilities of connection, communication, and ambient energy scavenging play significant roles, especially in a large-scale deployment. This paper classifies wireless sensor nodes into two major categories based the types of the sensor array (heterogeneous/homogeneous). It also emphasizes on the utilization of ad hoc networking and energy harvesting mechanisms as a fundamental cornerstone to building a self-governing, sustainable, and perpetually-operated sensor system. We review systems representative of each category and depict trends in system development.