No abstract

No abstract

Quadcopters are beginning to play an important role in precision agriculture. In order to localize and operate the quadcopter automatically in complex agricultural settings, such as a greenhouse, a robust positioning system is needed. In previous research, we developed a spread spectrum sound-based local positioning system (SSSLPS) with a 20 mm accuracy within a 30 × 30 m greenhouse area. In this research, a noise tolerant SSSLPS was developed and evaluated. First, the acoustic noise spectrum emitted by the quadcopter was documented, and then the noise tolerance properties of SSSounds were examined and tested. This was done in a greenhouse with a fixed quadcopter (9.75 N thrust) with the positioning system mounted on it. The recorded quadcopter noise had a broadband noise compared to the SSSound. Taking these SSSound properties into account, the noise tolerance of the SSSLPS was improved, achieving a positioning accuracy of 23.2 mm and 31.6 mm accuracy within 12 × 6 m for both Time-division Multiple Access (TDMA) and Frequency-division Multiple Access (FDMA) modulation. The results demonstrate that the SSSLPS is an accurate, robust positioning system that is noise tolerant and can used for quadcopter operation even within a small greenhouse.

A spread spectrum sound-based local positioning system (SSSLPS) has been developed for indoor agricultural robots by our research group. Such an SSSLPS has several advantages, including effective propagation, low cost, and ease of use. When using sound velocity for field position measurements in a greenhouse, spatial and temporal variations in temperature during the day can have a major effect on sound velocity and subsequent positioning accuracy. In this research, a temperature-compensated sound velocity positioning was proposed and evaluated in comparison to a conventional temperature sensor method. Results indicate that this new proposed method has a positioning accuracy to within 20 mm in a 3 m × 9 m ridged greenhouse. It has the potential to replace the current system of using the temperature sensors in a greenhouse.

No abstract