No abstract

Hybrid composite materials, which combine two or more types of fiber in a single matrix, have currently drawn the interest of researchers. This research investigates the tensile and impact properties of hybrid kenaf/glass reinforced metal laminates (FMLs) with different fiber orientations and stacking configurations. FMLs were formed by sandwiching the annealed aluminum 5052 sheets to the composite laminates using hot press molding compression technique. The tensile test was performed at a quasi-static rate of 2 mm/min with reference to ASTM E8 whereas Charpy impact test was conducted using impact pendulum tester according to ASTM E23.Results showed that improvement in tensile and impact strength was observed in hybrid FMLs compared to kenaf fiber reinforced FMLs. Fiber orientation of ±45° reduced the tensile strength but increased the impact strength of FMLs in comparison with fiber orientation of 0°/90°. Overall, hybrid FMLs incorporated with a fiber stacking sequence of glass/kenaf/glass showed superior characteristic in tensile and impact performance. K E Y W O R D Sfiber metal laminates, hybrid composites, impact properties, kenaf fibers, tensile properties, thermoplastic

Hybrid composites have become the focal point of research communities due to the balance in mechanical and ecological properties of such materials.Hybridization is an efficient technique to strengthen and enhance the performance of composite materials. In this research study, hybrid composites were prepared by embedding pineapple leaf and glass fibers in polypropylene polymers via the hot press molding compression technique. Mechanical tests were carried out to determine the tensile, flexural and Charpy impact properties of pineapple leaf/glass fiber-reinforced hybrid composite laminates. Additionally, water absorption test was also conducted to investigate the influence of hybridization on the moisture uptake of hybrid composites. In accordance with the findings obtained, the hybridization of pineapple leaf with glass fibers was found to improve the mechanical properties and moisture uptake sensitivity of the composite laminates. The [G/P/G] composite laminates are especially promising, having comparable mechanical strengths to those of non-hybrid [G/G/G] composite laminates. Meanwhile, the water absorption and diffusion coefficient of [G/P/G] composite laminates were 66.64% and 40.71% lower than non-hybrid [P/P/P] composite laminates. Based on the findings obtained, it is anticipated that the hybridization of pineapple leaf and glass fibers endows the composite laminates with lightweight characteristic, remarkable mechanical properties and low moisture uptake sensitivity while improving the environmental friendliness of the materials. Therefore, hybrid composites have indeed attested a very high potential to be used in transportation sectors.

No abstract

No abstract