Lâmpada de descarga de mercúrio sem eletrodo (Hg-EDL) foi aplicada em estudos de degradação fotolítica e fotocatalítica para avaliar o potencial de degradação de uma solução de Paracetamol 10 mg L-1. A fotodegradação (fotólise e fotocatálise) foi conduzida em reator UV/MW, com potência microondas fixa (200W, pH ̴ 7) e diferentes tempos de irradiação (0,083 a 2,0 min.). Após irradiadas, as amostras foram analisadas através de espectrofotometria UV/Vis para quantificação do fármaco. Houve a remoção de até 70,1% no ensaio fotolítico com o tempo de 2 min., enquanto para o processo fotocatalítico (aplicando suspensão de 1 g L-1 dos semicondutores) os resultados de remoção foram da ordem de 60%. A cinética de primeira ordem foi aplicada, sendo determinada uma constante k = 0,602 min-1 e r2 = 0,993, evidenciando um ajuste adequado a cinética de ordem 1. Assim, o reator UV/MW demonstra elevada eficiência no processo de degradação do paracetamol, uma vez que elevada taxa de remoção e valor elevado de constante cinética de degradação foram obtidas para o respectivo sistema. O foto reator avaliado pode ser explorado em ensaios de degradação com outros compostos, possibilitando a avaliação de sua eficiência frente a degradação de uma maior variedade de contaminantes emergentes.
RESUMO-Radiação ultravioleta foi utilizada para a degradação fotocatalítica da fluoxetina mediada por diferentes amostras de TiO2. O estudo de influência do pH no processo de fotodegradação evidenciou uma maior taxa de remoção do fármaco em pH alcalino, atingindo valores da ordem de 97 e 98% para pH= 10,2 e 11,7, respectivamente. A aplicação de diferentes amostras do semicondutor TiO2 para degradação fotocatalítica da fluoxetina em pH = 8,5 exerceu pouca influência na fotodegradação do fármaco, porém, uma significativa influência nas quantidades formadas de produtos de transformação foi verificada.
RESUMO-Diferentes métodos de sínteses (Percursores Poliméricos (PP), hidrotermal assistido em radiação micro-ondas (MW) e sonoquímico (US) foram aplicados para obtenção do semicondutor TiO 2 .As suas características físicoquímicas se mostraram influenciadas pelo método de síntese aplicado, evidenciando que por meio dos métodos MW e US, a fase fotoativa do TiO 2 (Anatase) é preferencialmente obtida. Os diâmetros de partícula variaram de 25 a 90 nm, a carga superficial (potencial zeta) variaram de-2,2 mV à 23,0 mV. Palavras-chave: Nanomateriais. Métodos de síntese. Caracterização físicoquímica.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.