The use of measured volatile organic chemical (VOC) concentrations in indoor air to evaluate vapor intrusion is complicated by (i) indoor sources of the same VOCs and (ii) temporal variability in vapor intrusion. This study evaluated the efficacy of utilizing induced negative and positive building pressure conditions during a vapor intrusion investigation program to provide an improved understanding of the potential for vapor intrusion. Pressure control was achieved in five of six buildings where the investigation program was tested. For these five buildings, the induced pressure differences were sufficient to control the flow of soil gas through the building foundation. A comparison of VOC concentrations in indoor air measured during the negative and positive pressure test conditions was sufficient to determine whether vapor intrusion was the primary source of VOCs in indoor air at these buildings. The study results indicate that sampling under controlled building pressure can help minimize ambiguity caused by both indoor sources of VOCs and temporal variability in vapor intrusion.
Distinguishing between vapor intrusion and indoor sources of volatile organic compounds (VOCs) is a significant challenge in conventional vapor intrusion assessments. For this research project, the authors developed a step-by-step protocol to streamline building-specific investigations by using on-site gas chromatography/mass spectrometry (GC/MS) analysis and building pressure manipulation to determine the source of VOCs in indoor air during a 1-day field investigation. Protocol validation included implementation in industrial buildings and testing alongside conventional methods. The new protocol compares favorably to conventional approaches, yielding more definitive results in less time. This article presents three case studies which illustrate application of the protocol.
A large number of states have issued guidance addressing the vapor intrusion pathway making it difficult to keep up with various policies and requirements. We have compiled and reviewed guidance from 35 states, half of which have issued documents within the last three years. A comparison of policies among states shows reasonable consistency in some areas-for example, 20 of 23 states that provide an exclusion distance for subsurface sources of chlorinated volatile organic compounds (VOCs) use a distance of 100 feet. However, more commonly, the policy decisions vary widely. Among states, indoor air screening concentrations for the same VOC vary by more than 2,000 times and subsurface screening concentrations vary by more than 2,000,000 times. These wide discrepancies suggest a need for communication and consensus building in order to increase consistency in the management of the vapor intrusion pathway. O
The role of sewer lines as preferential pathways for vapor intrusion is poorly understood. Although the importance of sewer lines for volatile organic compound (VOC) transport has been documented at a small number of sites with vapor intrusion, sewer lines are not routinely sampled during most vapor intrusion investigations. We have used a tracer study and VOC concentration measurements to evaluate the role of the combined sanitary/storm sewer line in VOC transport at the USEPA vapor intrusion research duplex in Indianapolis, Indiana. The results from the tracer study demonstrated gas migration from the sewer main line into the duplex. The migration pathway appears to be complex and may include leakage from the sewer lateral at a location below the building foundation. Vapor samples collected from the sewer line demonstrated the presence of tetrachloroethene (PCE) and chloroform in the sewer main in front of the duplex and at multiple sample locations within the sewer line upstream of the duplex. These test results combined with results from the prior multi-year study of the duplex indicate that the sewer line plays an important role in transport of VOCs from the subsurface source to the immediate vicinity of the duplex building envelope.
We made 74 closely spaced (< 2 km apart) heat flow measurements around and over two salt structures on the Texas continental slope, Gulf of Mexico. The values outlined the shape of the heat flow anomalies over both structures. Based on a preceding high resolution seismic survey, we interpreted these structures to be a cylindrical plug and a salt tongue extending from the crest of a wall‐shaped feeder. The heat flow observations clearly reflect differences between the two features and are consistent with the prior structural interpretation. The values over the salt plug are nearly all greater than 70 mW/m². The measurements over the salt tongue have a sharp heat flow peak of 90 mW/m² associated with the presumed feeder and rather uniform values around 60 mW/m² over the remainder. The variation of heat flow over both structures is smooth and shows no apparent scatter. Heat flow values off these features are uniformly low, around 30 mW/m². Thermal effects from bottom water temperature fluctuation, slope sedimentation, diapiric movement of the salt body, and pore fluid migration appear unable to provide a satisfactory explanation for the observations. However, thickness variations of a highly conductive salt body can easily account for the heat flow anomalies. We suggest that modeling of the conductive anomaly should provide substantial constraints on the bottom geometry of the salt.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.