Yttria tetragonal zirconia polycrystal in the form of presintered commercial blocks is used to manufacture dental prostheses through computer-aided design/computer-aided manufacturing technology. Although it presents appropriate mechanical properties, it may fail because of defects resulting from the forming, presintering, machining, or sintering processes. The aim of the current study is to evaluate the influence of the presintering process on the microhardness of presintered blocks and on the elastic modulus of sintered materials. Blocks were formed by means of uniaxial and isostatic pressing. Next, they were presintered at different temperatures and soaking times, besides being subjected to the Vickers microhardness and mechanical tests to evaluate their elastic modulus. Statistical analyses showed that the presintering time at 900°C had no effect on microhardness, although it was significant at 950°C. The postsintering elastic modulus ranged from 205.7 to 231.9 GPa, which is similar to the range recorded in the literature. The presintering process had no influence on the postsintering mechanical resistance results.
RESUMO A zircônia Y-TZP é muito utilizada na confecção de coping como material estrutural para próteses odontológicas devido à sua cor branca/perolada opaca e resistência mecânica. Estas próteses são confeccionadas por usinagem com apoio de um software de CAM (Computer Aided Manufacturing), a partir de blocos prensados e pré-sinterizados. A pré-sinterização consiste em aquecer os blocos compactados a altas temperaturas, com uma taxa lenta de aquecimento até o início da formação dos pescoços entre as partículas, quando proporciona dureza/resistência e usinabilidade. Uma contradição, pois a dureza/resistência mecânica é necessária para proporcionar estabilidade as forças de corte, mas se muito duro, pode dificultar a usinagem então se deve encontrar uma faixa de compromisso de temperatura entre estabilidade e usinabilidade. Dessa forma, o objetivo do presente trabalho foi investigar a relação entre a microdureza e temperatura de pré-sinterização da zircônia Y-TZP e seu comportamento ao ser submetido à usinagem. O ensaio de microdureza foi escolhido como representante de resistência mecânica por ser não destrutivo e de resultado imediato. O pó de zircônia experimental foi submetido à prensagem uniaxial seguido de prensagem isostática a frio à 200 MPa e pré-sinterização entre 900°C e 950°C. Os blocos foram cortados e submetidos ao teste de estabilidade na usinagem e ensaio de microdureza Vickers sendo os dados submetidos ao teste de “normalidade” de Anderson-Darlin com p > 0,05. Foi utilizada ANOVA de um fator com o teste de Tukey-Kramer para verificar as diferenças entre as médias dos grupos. A investigação demonstrou que a diferença de 50°C na temperatura de pré-sinterização, acima de 900°C afetou significativamente a microdureza, contudo os tempos de patamar 2 e 4 horas não a influenciou significativamente. A maior temperatura de pré-sinterização dos grupos experimentais testados possibilitou um melhor comportamento na usinagem com o apoio de um software CAM, sendo a microdureza similar ao material comercial ZL.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.