As representações sociais dos trabalhadores sobre o Programa Saúde da FamíliaThe social representations of workers regarding the Family Health Program
Brazil has been facing a huge rise in fuel and diesel prices due to the rise in the international market and the war between Ukraine and Russia. The rise in electricity prices is also a problem that affects everyone in Brazil. This study aimed to evaluate the performance and emissions of a diesel engine for power generation that operates with crambe-based fuels with blends of 0% (control), B5, B10, B15, B20, B50, B70, and B90. The fuels were tested in an 8 kVA generator engine at a load of up to 6000 W. The biofuels were obtained from a mixture of diesel with crambe biodiesel at incremental levels from B0 to B90 in the fuel mixture. The increased proportion of crambe biodiesel resulted in lower specific consumption. Crambe biodiesel resulted in a reduction of CO, CO2, and NO2 emissions due to an increase in crambe biodiesel at the proportion. The results indicate that crambe biodiesel blends are viable technical solutions for the partial replacement of conventional diesel.
A crescente conscientização acerca dos impactos da poluição gerada por combustíveisfósseis, levou países de todo o mundo a repensarem o modo de como se utilizar energia. Em 2015 notratado de Paris durante a COP21 o Brasil assinou junto com mais 196 o termo de redução de CO 2 naatmosfera. E como uma das soluções para combustível renovável o óleo de canola é uma alternativa.O óleo é obtido das sementes das variedades de Brassica sp., e é amplamente utilizado paraalimentação humana, para lubrificação de maquinário industrial e para a produção de biodiesel. Oobjetivo deste estudo foi avaliar o processo de prensagem mecânica de grãos de canola em diferentestemperaturas e velocidades de rotação em uma extrusora mecânica com automação. O trabalho foidesenvolvido no laboratório da CTA, em uma prensa extrusora de grãos Z-1500. Para o presenteestudo foram definidas 4 temperaturas (110–120 °C, 120–30 °C, 130–140 °C e 140–50 °C) e 5velocidades [1000, 1200, 1400, 1600 e 1800 RPM (Rotações por minuto). Foi empregado um designexperimental 4 × 5 fatorial para determinar o rendimento de extração de óleo, massa específica do óleoe teor de proteínas na massa bromatológica
Over the last decades, wind energy has been named as a clean method to generate electrical power. But, to claim this argument many aspects must be evaluated. On one hand, wind power, as an electrical energy source, generates minimum environmental impact when in operation. On the other side, the material extraction for the manufacturing process does create environmental impact and require electrical energy usage. Therefore, when claiming the sustainability of wind power, as a method of electrical power generation, many aspects must be evaluated, such as the Life Cycle Analysis of the turbine. This study has been taken to evaluate the energy cost and its payback period off the wind power turbine S-600, manufactured by Greatwatt, has being evaluated. This evaluation has covered the embodied energy in the gross material present on the final product and its energetic payback period, for the specific case of working in a rural area in the state of Paraná, Brazil. The ISO 14040 methodology, for life cycle analyses, has being applied to estimate the embodied energy in the gross material present on the generator. The annual average energetic production estimation has considered 4 cases, varying the voltage output and hub height, and the nominal capacity, claimed by the manufacturing company. To assess the embodied energy payback period, the theoretical generation capacity has been estimated. Thus, by this analysis, this article has concluded that the embodied energy in the gross material is 803.39MJ. The energetic payback period for this product, at 10 meters hub height, is 11.6 months, if operating on 12 V, and 12.6 months, if operation on 24 V. Furthermore, in the situation of installed at 30 meters from the ground, the energy payback period drops down to 5.3 and 5.5 months, operating on 12 or 24 V respectively. In the situation of nominal generation, the energetic payback period would dropdown to 4.6 and 3.1 months, operating on 12 or 24 V respectively.
Combustíveis como o biodiesel vêm ganhando muita popularidade pelo fato de ser um combustível alternativo. O estudo trata da avaliação do desempenho e de emissões de um motor gerador operando com diesel e blendas de biodiesel, assistido por sistema de automação industrial utilizados na Indústria 4.0. O experimento foi conduzido nos laboratórios da Universidade Estadual do Oeste do Paraná. Foram avaliados durante o experimento a energia gerada, o consumo específico, a eficiência energética e as emissões geradas pelo conjunto motor gerador. Os tratamentos utilizados foram o diesel de petróleo tipo A (D100), cinco blendas (misturas) de biodiesel de canola (B5, B10, B15, B20 e B50) e biodiesel puro (B100). As cargas aplicadas ao motor gerador foram do tipo resistivas de 1,0; 1,5; 4,5 e 6,0 kW para cada tipo de combustível. A energia gerada se manteve crescente e estável conforme o aumento de carga. O melhor resultado do consumo específico foi com o diesel (D100), seguido por B10 e o B20, ambos para a carga de 4,5 kW. As emissões de gases de monóxido de carbono são reduzidas enquanto as emissões de dióxido de carbono aumentam com aplicação de maiores cargas. O biodiesel puro (B100) tende a apresentar melhor eficiência energética que as misturas binárias utilizadas quando inserida a carga de 6,0 kW. Os resultados obtidos demonstram que as misturas de biodiesel de canola com o diesel convencional são uma das possíveis soluções viáveis na substituição parcial do diesel mineral.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.