A facile strategy has been adopted for the preparation of ZnFe2O4/NRG composite by anchoring ultrasmall ZnFe2O4 nanoparticles on nitrogen-doped reduced graphene (denoted as NRG) for high-performance supercapacitor electrode. Remarkably, the growth of ZnFe2O4 nanocrystals, the reduction of graphitic oxide and the doping of nitrogen to graphene have been simultaneously achieved in one process. It is found that the NRG employed as substrate can not only control the formation of nano-sized ZnFe2O4, but also guarantee the high dispersion without any agglomeration. Benefiting from this novel combination and construction, the hybrid material has large surface area which can provide high exposure of active sites for easy access of electrolyte and fast electron transport. When served as supercapacitor electrode, the ZnFe2O4/NRG composite exhibits a favorable specific capacitance of 244 F/g at 0.5 A/g within the potential range from −1 to 0 V, desirable rate stability (retain 131.5 F/g at 10 A/g) and an admirable cycling durability of 83.8% at a scan rate of 100 mV/s after 5000 cycles. When employed as symmetric supercapacitor, the device demonstrates favorable performance. These satisfactory properties of the ZnFe2O4/NRG composite can make it be of great promise in the supercapacitor application.

The easy aggregation nature of ferromagnetic nanoparticles (NPs) prepared by conventional routes usually leads to a large particle size and low loading, which greatly limits their applications to the reduction of 4-nitrophenol (4-NP). Herein, we developed a novel in situ thermal decomposition and reduction strategy to prepare Ni nanoparticles/silica nanotubes (Ni/SNTs), which can markedly prevent the aggregation and growth of Ni NPs, resulting in an ultra-small particle size (about 6 nm), good dispersion and especially high loading of Ni NPs. It was found that Ni/SNTs, which have a high specific surface area (416 m(2) g(-1)), exhibit ultra-high catalytic activity in the 4-NP reduction (complete reduction of 4-NP within only 60 s at room temperature), which is superior to most noble metal (Au, Pt, and Pd) supported catalysts. Ni/SNTs still showed high activity even after re-use for several cycles, suggesting good stability. In particular, the magnetic property of Ni/SNTs makes it easy to recycle for reuse.

A unique and rational design was presented to fabricate Ni/SiO2@Au magnetic hollow microspheres (MHMs) with interesting structures and well-dispersed metal nanoparticles. Hierarchical nickel silicate hollow microspheres were synthesized using silica colloidal spheres as a chemical template. Then, Ni/SiO2 MHMs with well-dispersed Ni nanoparticles were prepared via an in situ reduction approach. Ni/SiO2@Au MHMs were finally obtained by immobilizing uniform Au nanoparticles onto Ni/SiO2 support through a low-temperature chemical reduction process. It was found that Ni/SiO2@Au MHMs inherit the shape and uniformity of the original silica scaffold, and Ni NPs and Au NPs, which were less than 5 nm in size, were well dispersed on the mesoporous silica shell with narrow size distribution. Both Ni/SiO2 and Ni/SiO2@Au MHMs showed excellent catalytic activity in the 4-nitrophenol reduction reaction. Importantly, introduction of a small amount of Au NPs onto Ni/SiO2 MHMs markedly improved the catalytic activity. In particular, Ni/SiO2@Au MHMs showed high conversion even after re-use for several cycles with magnetic separation. The unique structure, high catalytic performance, and ease of separation make Ni/SiO2@Au MHMs highly promising candidates for diverse applications.