Thermoelectric generators (TEGs) provide a unique solution for energy harvesting from waste heat, presenting a potential solution for green energy. However, traditional rigid and flexible TEGs cannot work on complex and dynamic surfaces. Here, we report a stretchable TEG (S-TEG) (over 50% stretchability of the entire device) that is geometrically suitable for various complex and dynamic surfaces of heat sources. The S-TEG consists of hot-pressed nanolayered p-(Sb2Te3) and n-(Bi2Te3)-type thermoelectric couple arrays and exploits the wavy serpentine interconnects to integrate all units. The internal resistance of a 10 × 10 array is 22 ohm, and the output power is ∼0.15 mW/cm2 at ΔT = 19 K on both developable and nondevelopable surfaces, which are much improved compared with those of existing S-TEGs. The energy harvesting of S-TEG from the dynamic surfaces of the human skin offers a potential energy solution for the wearable devices for health monitoring.

Ultrasonic driven wireless charging technology has recently attracted much attention in the next generation bio-implantable systems; however, most developed ultrasonic energy harvesters are bulky and rigid and cannot be applied to general complex surfaces. Here, a flexible piezoelectric ultrasonic energy harvester (PUEH) array was designed and fabricated by integrating a large number of piezoelectric active elements with multilayered flexible electrodes in an elastomer membrane. The developed flexible PUEH device can be driven by the ultrasonic wave to produce continuous voltage and current outputs on both planar and curved surfaces, reaching output signals of more than 2 Vpp and 4 μA, respectively. Potential applications of using the flexible PUEH to charge energy-storage devices and power commercial electronics were demonstrated. Its low attenuation performance was also evaluated using the in vitro test of transmitting power through pork tissue, demonstrating its potential use in the next generation of wirelessly powered bioimplantable micro-devices.