No abstract

This article proposes an effective methodology for the fluid-dynamic design optimization of the sliding spool of a hydraulic proportional directional valve: the goal is the minimization of the flow force at a prescribed flow rate, so as to reduce the required opening force while keeping the operation features unchanged. A full three-dimensional model of the flow field within the valve is employed to accurately predict the flow force acting on the spool. A theoretical analysis, based on both the axial momentum equation and flow simulations, is conducted to define the design parameters, which need to be properly selected in order to reduce the flow force without significantly affecting the flow rate. A genetic algorithm, coupled with a computational fluid dynamics flow solver, is employed to minimize the flow force acting on the valve spool at the maximum opening. A comparison with a typical single-objective optimization algorithm is performed to evaluate performance and effectiveness of the employed genetic algorithm. The optimized spool develops a maximum flow force which is smaller than that produced by the commercially available valve, mainly due to some major modifications occurring in the discharge section. Reducing the flow force and thus the electromagnetic force exerted by the solenoid actuators allows the operational range of direct (single-stage) driven valves to be enlarged

No abstract

If you would like to write for this, or any other Emerald publication, then please use our Emerald for Authors service information about how to choose which publication to write for and submission guidelines are available for all. Please visit www.emeraldinsight.com/authors for more information. About Emerald www.emeraldinsight.comEmerald is a global publisher linking research and practice to the benefit of society. The company manages a portfolio of more than 290 journals and over 2,350 books and book series volumes, as well as providing an extensive range of online products and additional customer resources and services.Emerald is both COUNTER 4 and TRANSFER compliant. The organization is a partner of the Committee on Publication Ethics (COPE) and also works with Portico and the LOCKSS initiative for digital archive preservation. AbstractPurpose -The purpose of this paper is to present a full 3D Computational Fluid Dynamics (CFD) analysis of the flow field through hydraulic directional proportional valves, in order to accurately predict the flow forces acting on the spool and to overcome the limitations of two-dimensional (2D) and simplified three-dimensional (3D) models. Design/methodology/approach -A full 3D CAD representation is proposed as a general approach to reproduce the geometry of an existing valve in full detail; then, unstructured computational grids, which identify peculiar positions of the spool travel, are generated by means of the mesh generation tool Gambit. The computational grids are imported into the commercial CFD code Fluent, where the flow equations are solved assuming that the flow is steady and incompressible. To validate the proposed computational procedure, the predicted flow rates and flow forces are compared with the corresponding experimental data. Findings -The superposition between numerical and experimental curves demonstrates that the proposed full 3D numerical analysis is more effective than the simplified 3D flow model that was previously proposed by the same authors. Practical implications -The presented full 3D fluid dynamic analysis can be employed for the fluid-dynamic design optimization of the sliding spool and, more generally, of the internal profiles of the valve, with the objective of reducing the flow forces and thus the required control force. Originality/value -The paper proposes a new computational strategy that is capable of recognizing all 3D geometrical details of a hydraulic directional proportional valve and that provides a significant improvement with respect to 2D and partially 3D approaches.

No abstract