The increase of specific energy of current Li ion batteries via further increase of the cell voltage, for example, to 4.5 V is typically accompanied by a sudden and rapid capacity fade, known as “rollover” failure. This failure is the result of Li dendrite formation triggered in the course of electrode cross‐talk, that is, dissolution of transition metals (TMs) from the cathode and deposition on the anode. It is shown herein, that the elimination of ethylene carbonate (EC) from a state‐of‐the‐art electrolyte, that is, from 1.0 m LiPF6 in a 3:7 mixture of EC and ethyl methyl carbonate prevents this failure in high‐voltage LiNi0.5Co0.2Mn0.3O2||graphite cells, even without any electrolyte additives. While the oxidative stability on the cathode side is similar in both electrolytes, visible by a decomposition plateau at 5.5 V versus Li|Li+ during charge, the anode side in the EC‐free electrolyte reveals significantly less TM deposits and Li metal dendrites compared to the EC‐based electrolyte. The beneficial effect of EC‐free electrolytes is related to a significantly increased amount of degraded LiPF6 species, which effectively trap dissolved TMs and suppress the effect of detrimental cross‐talk, finally realizing rollover‐free performance under high voltage conditions.

Layered oxides, particularly including Li[NixCoyMnz]O2 (NCMxyz) materials, such as NCM523, are the most promising cathode materials for high‐energy lithium‐ion batteries (LIBs). One major strategy to increase the energy density of LIBs is to expand the cell voltage (>4.3 V). However, high‐voltage NCM∥ graphite full cells typically suffer from drastic capacity fading, often referred to as “rollover” failure. In this study, the underlying degradation mechanisms responsible for failure of NCM523∥ graphite full cells operated at 4.5 V are unraveled by a comprehensive study including the variation of different electrode and cell parameters. It is found that the “rollover” failure after around 50 cycles can be attributed to severe solid electrolyte interphase growth, owing to formation of thick deposits at the graphite anode surface through deposition of transition metals migrating from the cathode to the anode. These deposits induce the formation of Li metal dendrites, which, in the worst cases, result in a “rollover” failure owing to the generation of (micro‐) short circuits. Finally, approaches to overcome this dramatic failure mechanism are presented, for example, by use of single‐crystal NCM523 materials, showing no “rollover” failure even after 200 cycles. The suppression of cross‐talk phenomena in high‐voltage LIB cells is of utmost importance for achieving high cycling stability.

Single ion conducting polymer electrolytes (SIPEs) comprised of homopolymers containing a polysulfonylamide segment in the polymer backbone are presented.