Palisade fabric is a ubiquitous texture of silica sinter found in low temperature (<40°C) regimes of hot spring environments, and it is formed when populations of filamentous microorganisms act as templates for silica polymerization. Although it is known that postdepositional processes such as biological degradation and dewatering can strongly affect preservation of these fabrics, the impact of extreme aridity has so far not been studied in detail. Here, we report a detailed analysis of recently silicified palisade fabrics from a geyser in El Tatio, Chile, tracing the progressive degradation of microorganisms within the silica matrix. This is complemented by heating experiments of natural sinter samples to assess the role of diagenesis. Sheathed cyanobacteria, identified as Leptolyngbya sp., were found to be incorporated into silica sinter by irregular cycles of wetting, evaporation, and mineral precipitation. Transmission electron microscopy analyses revealed that nanometer-sized silica particles are filling the pore space within individual cyanobacterial sheaths, giving rise to their structural rigidity to sustain a palisade fabric framework. Diagenesis experiments further show that the sheaths of the filaments are preferentially preserved relative to the trichomes, and that the amount of water present within the sinter is an important factor for overall preservation during burial. This study confirms that palisade fabrics are efficiently generated in a highly evaporative geothermal field, and that these biosignatures can be most effectively preserved under dry diagenetic conditions.

Environmental contextArsenic contamination of groundwater is a major environmental problem in many areas of the world. In south-east Asia, iron-rich reducing groundwater mixes with oxidising river water in hyporheic zones, precipitating iron oxides. These oxides can act as a natural reactive barrier capable of accumulating elevated solid-phase concentrations of arsenic. AbstractShallow, anoxic aquifers within the Ganges–Brahmaputra–Meghna Delta (GBMD) commonly contain elevated concentrations of arsenic (As), iron (Fe) and manganese (Mn). Highly enriched solid-phase concentrations of these elements have been observed within sediments lining the banks of the Meghna River. This zone has been described as a Natural Reactive Barrier (NRB). The impact of hydrological processes on NRB formation, such as transient river levels, which drive mixing between rivers and aquifers, is poorly understood. We evaluated the impact of groundwater flow dynamics on hydrobiogeochemical processes that led to the formation of an Fe- and Mn-rich NRB containing enriched As, within a riverbank aquifer along the Meghna River. The NRB dimensions were mapped using four complementary elemental analysis methods on sediment cores: X-ray fluorescence (XRF), aqua regia bulk extraction, and HCl and sodium phosphate leaching. It extended from 1.2 to 2.4 m in depth up to 15 m from the river’s edge. The accumulated As was advected to the NRB from offsite and released locally in response to mixing with aged river water. Nearly all of the As was subsequently deposited within the NRB before discharging to the Meghna. Significant FeII release to the aqueous phase was observed within the NRB. This indicates the NRB is a dynamic zone defined by the interplay between oxidative and reductive processes, causing the NRB to grow and recede in response to rapid and seasonal hydrologic processes. This implies that natural and artificially induced changes in river stages and groundwater-tables will impact where As accumulates and is released to aquifers.

In silica‐rich hot spring environments, internally laminated, digitate sinter deposits are often interpreted as bio‐mediated structures. The organic components of microbial communities (cell surfaces, sheaths and extracellular polymeric substances) can act as templates for silica precipitation, therefore influencing digitate sinter morphogenesis. In addition to biologic surface‐templating effects, various microenvironmental factors (hydrodynamics, local pH and fluctuating wind patterns) can also influence silica precipitation, and therefore the morphology of resulting digitate sinters. Digitate sinter morphology thus depends on the dynamic interplay between microenvironmentally driven silica precipitation and microbial growth, but the relative contributions of both factors are a topic of continuing research. Here we present a detailed study of digitate silica sinters in distal, low‐temperature regimes of the El Tatio geothermal field, Chile. This high‐altitude geothermal field is extremely arid and windy, and has one of the highest silica precipitation rates found in the world. We find that digitate silica sinters at El Tatio always accrete into the prevailing eastward wind direction and exhibit laminar growth patterns coinciding with day–night cycles of wind‐ and thermally driven evaporation and rewetting. Subaerial parts of digitate sinters lack preserved organics and sinter textures that would indicate past microbial colonization, while filamentous cyanobacteria with resistant, silicified sheaths only inhabit subaqueous cavities that crosscut the primary laminations. We conclude that, although fragile biofilms of extremophile micro‐organisms may have initially been present and templated silica precipitation at the tips of these digitate sinters, the saltation of sand grains and precipitation of silica by recurrent wind‐ and thermally driven environmental forcing at El Tatio are important, if not dominant factors shaping the morphology of these digitate structures. Our study sheds light on the relative contributions of biogenic and abiogenic factors in sinter formation in geothermal systems, with geobiological implications for the cautious interpretation of stromatolite‐like features in ancient silica deposits on Earth and Mars.