Abstract:Prosopis was introduced to Baringo, Kenya in the early 1980s for provision of fuelwood and for controlling desertification through the Fuelwood Afforestation Extension Project (FAEP). Since then, Prosopis has hybridized and spread throughout the region. Prosopis has negative ecological impacts on biodiversity and socio-economic effects on livelihoods. Vachellia tortilis, on the other hand, is the dominant indigenous tree species in Baringo and is an important natural resource, mostly preferred for wood, fodder and charcoal production. High utilization due to anthropogenic pressure is affecting the Vachellia populations, whereas the well adapted Prosopis-competing for nutrients and water-has the potential to replace the native Vachellia vegetation. It is vital that both species are mapped in detail to inform stakeholders and for designing management strategies for controlling the Prosopis invasion. For the Baringo area, few remote sensing studies have been carried out. We propose a detailed and robust object-based Random Forest (RF) classification on high spatial resolution Sentinel-2 (ten meter) and Pléiades (two meter) data to detect Prosopis and Vachellia spp. for Marigat sub-county, Baringo, Kenya. In situ reference data were collected to train a RF classifier. Classification results were validated by comparing the outputs to independent reference data of test sites from the "Woody Weeds" project and the Out-Of-Bag (OOB) confusion matrix generated in RF. Our results indicate that both datasets are suitable for object-based Prosopis and Vachellia classification. Higher accuracies were obtained by using the higher spatial resolution Pléiades data (OOB accuracy 0.83 and independent reference accuracy 0.87-0.91) compared to the Sentinel-2 data (OOB accuracy 0.79 and independent reference accuracy 0.80-0.96). We conclude that it is possible to separate Prosopis and Vachellia with good accuracy using the Random Forest classifier. Given the cost of Pléiades, the free of charge Sentinel-2 data provide a viable alternative as the increased spectral resolution compensates for the lack of spatial resolution. With global revisit times of five days from next year onwards, Sentinel-2 based classifications can probably be further improved by using temporal information in addition to the spectral signatures.

With climate change, extreme storms are expected to occur more frequently. These storms can cause severe forest damage, provoking direct and indirect economic losses for forestry. To minimize economic losses, the windthrow areas need to be detected fast to prevent subsequent biotic damage, for example, related to beetle infestations. Remote sensing is an efficient tool with high potential to cost-efficiently map large storm affected regions. Storm Niklas hit South Germany in March 2015 and caused widespread forest cover loss. We present a two-step change detection approach applying commercial very high-resolution optical Earth Observation data to spot forest damage. First, an object-based bi-temporal change analysis is carried out to identify windthrow areas larger than 0.5 ha. For this purpose, a supervised Random Forest classifier is used, including a semi-automatic feature selection procedure; for image segmentation, the large-scale mean shift algorithm was chosen. Input features include spectral characteristics, texture, vegetation indices, layer combinations and spectral transformations. A hybrid-change detection approach at pixel-level subsequently identifies small groups of fallen trees, combining the most important features of the previous processing step with Spectral Angle Mapper and Multivariate Alteration Detection. The methodology was evaluated on two test sites in Bavaria with RapidEye data at 5 m pixel resolution. The results regarding windthrow areas larger than 0.5 ha were validated with reference data from field visits and acquired through orthophoto interpretation. For the two test sites, the novel object-based change detection approach identified over 90% of the windthrow areas (≥0.5 ha). The red edge channel was the most important for windthrow identification. Accuracy levels of the change detection at tree level could not be calculated, as it was not possible to collect field data for single trees, nor was it possible to perform an orthophoto validation. Nevertheless, the plausibility and applicability of the pixel-based approach is demonstrated on a second test site.

Increases in extreme weather events associated with climate change have the potential to put currently healthy forests at risk. One option to minimize this risk is the application of forest management measures aimed at generating species mixtures predicted to be more resilient to these threats. In order to apply such measures appropriately, forest managers need up-to-date, accurate and consistent forest maps at relatively fine spatial resolutions. Cost efficiency is a major factor when creating such maps. Taking European spruce (Picea abies) and Scots pine (Pinus sylvestris) as an example, this paper describes an innovative approach for mapping two tree species using a combination of commercial very high resolution WorldView-2 (WV2) images and Landsat time series data. As a first step, this study used a supervised object-based classification of WV2 images covering relatively small test sites distributed across the region of interest. Using these classification maps as training data, wall-to-wall mapping of fractional coverages of spruce and pine was achieved using multi-temporal Landsat data and Random Forests (RF) regression. The method was applied for the entire state of Bavaria (Germany), which comprises a total forested area of approximately 26,000 km 2. As applied here, this two-step approach yields consistent and accurate maps of fractional tree cover estimates with a spatial resolution of 1 ha. Independent validation of the fractional cover estimates using 3780 reference samples collected through visual interpretation of orthophotos produced root-mean-square errors (RMSE) of 11% (for spruce) and 14% (for pine) with almost no bias, and R 2 values of 0.74 and 0.79 for spruce and pine, respectively. The majority of the validation samples (75% (spruce) and 84% (pine)) were modeled within the assumed uncertainty of ± 15% of the reference sample. Accuracies were significantly better compared to those achieved using a single-step classification of Landsat time series data at the pixel level (30 m), because the two-step approach better captures regional variation in the spectral signatures of target classes. Moreover, the increased number of available reference cells mitigates the impact of occasional errors in the reference data set. This two-step approach has great potential for cost-effective operational mapping of dominant forest types over large areas. 1. Introduction Climate change is expected to have an important influence on future growing conditions that will likely have a great impact on tree species. Depending on the location, some trees species will benefit, for example, from increasing temperatures and thus, extended vegetation periods. However, at other locations, increased temperatures are likely to lead to water stress, and hence, greater vulnerability of some tree species to abiotic and biotic disturbances (Lindner et al., 2010). In Central Europe, several coniferous tree species are of particular concern: the vulnerability of tree species such as European spruce and Scots pine is particularly hig...

No abstract

No abstract