The Organic Rankine Cycle (ORC) represents an emerging technology aimed at exploiting lower temperature heat sources, like waste heat in industrial processes or exhaust heat in combustion engines. One key aspect of this technology is an efficient and economical operation at part load, typically realized by a partial admission control, which is challenging to predict numerically. Full annulus computation can only be avoided applying empirical partial admission loss models to conventional full-admission computations. This article aims at assessing the reliability of such a loss model under real-gas and supersonic conditions as a first step towards knowledge-based improved loss models. Three different operating points of an 18.3 kW ORC turbine working with an ethanol-water mixture with two open stator passages (2 × 36°) are considered. Full annulus CFD computations are compared to experimental data and results of simulations in a conventional, full admission, periodic 72°-sector model with application of a 1D partial admission loss model. The experimentally obtained mass flow rate and efficiency are matched overall within their measurements accuracy. By highest inlet total pressure, the computed efficiency deviates about 4 % from the experiments. Predictions of efficiency based on the full admission and loss model correction deviate from full annulus computations less than 1 %. These findings suggest that the used empirical correlations for partial admission losses can provide acceptable results in the configuration under investigation.
The Organic Rankine Cycle (ORC) represents an emerging technology aimed at exploiting lower temperature heat sources, like waste heat in industrial processes or exhaust heat in combustion engines. One key aspect of this technology is an efficient and economical operation at part load, typically realized by a partial admission control, which is challenging to predict numerically. Full annulus computation can only be avoided applying empirical partial admission loss models to conventional full-admission computations. This article aims at assessing the reliability of such a loss model under real-gas and supersonic conditions as a first step towards knowledge-based improved loss models. Three different operating points of an 18.3 kW ORC turbine working with an ethanol-water mixture with two open stator passages (2 x 36°) are considered. Full annulus CFD computations are compared to experimental data and results of simulations in a conventional, full admission, periodic 72°-sector model with application of a 1D partial admission loss model. The experimentally obtained mass flow rate and efficiency are matched overall within their measurements accuracy. By highest inlet total pressure, the computed efficiency deviates about 4 % from the experiments. Predictions of efficiency based on the full admission and loss model correction deviate from full annulus computations less than 1 %. These findings suggest that the used empirical correlations for partial admission losses can provide acceptable results in the configuration under investigation.
Industrial processes, small-scale power plants or internal combustion engines produce a high amount of waste heat as a by-product. The Organic Rankine Cycle (ORC) technology allows to recover that heat more efficiently compared to steam/water in conventional Clausius-Rankine cycles. For a comparably efficient and economical operation over a wide range of operating conditions, partial admission control appears to be a well-suited design option for ORC turbines. However, accurate numerical performance prediction of a partial admitted turbine stage is challenging and requires full annulus CFD computations of the partial admitted turbine stage. In the present study, a comprehensive analysis of the internal flow and aerodynamic loss mechanisms in a supersonic, axial single stage impulse 18.3 kW ORC turbine operating with an ethanol/water gas-mixture as working fluid at a partial admission ratio of 40 % based on steady-state CFD computations is presented. A comparison of numerical and experimental results for a partial admission ratio of 20 % and 40 % shows, that for a partial admission ratio of 40 % efficiency predictions based on steady-state simulations are within the measurement uncertainty. To extract and quantify the magnitude of the occurring loss mechanisms, the entropy generation rate is analysed. The results show an entropy generation between the rotor blades and the closed stator passages, which has a significant influence on the turbine performance and leads to a reduction of efficiency of about 2 to 4.5 ppt. This was found to be related to a strong jet induced in the narrow gaps between the rotor leading edges and the trailing edges of the closed stator passages, which mixes with the stagnant flow in the following nozzle sections.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.