We present the design parameters, production process, and in-flight performance of the X-ray telescope (XRT) onboard Suzaku. The imaging capability is significantly improved over the ASCA XRT, which had half-power diameters of ${3\rlap {.}{}^{\mathrm {\prime }}6}$, to ${1\rlap {.}{}^{\mathrm {\prime }}8}$–${2\rlap {.}{}^{\mathrm {\prime }}3}$ for all four XRT-I modules. The optical axes are found to be distributed within a radius of ${1\rlap {.}{}^{\mathrm {\prime }}3}$, which makes the observation efficiency of all the XRTs more than 97% at the XIS-default observing position. The vignetting over the XIS field of view predicted via ray-tracing coincides with that measured for observations of the Crab Nebula to within $\sim 10\%$. Contemporaneous fits of a power law to all of the XIS spectra of the Crab Nebula taken at the two standard observing positions (XIS/HXD-default positions) gives a flux consistent with that obtained by Toor and Seward (1974, AJ, 79, 995) to within $\sim 2\%$. The pre-collimator on the top of each XRT module successfully reduces the intensity of the stray light from the $20'$ and $50'$-off directions down to the level of pre-flight expectations.

The radio complex Sgr B region is observed with the X-Ray Imaging Spectrometers (XIS) on board Suzaku. This region exhibits diffuse iron lines at 6.4, 6.7 and 6.9 keV, which are Kα lines of Fe I (neutral iron), Fe XXV (He-like iron) and Fe XXVI (H-like iron), respectively. The high energy resolving power of the XIS provides the separate maps of the K-shell transition lines from Fe I (6.4 keV) and Fe XXV (6.7 keV). Although the 6.7 keV line is smoothly distributed over the Sgr B region, a local excess is found near at (l, b) = (0. • 61, 0. • 01), possibly a new SNR. The plasma temperature is kT ∼3 keV and the age is estimated to be around several×10 3 years. The 6.4 keV image is clumpy with local excesses nearby Sgr B2 and at (l, b) = (0. • 74, −0. • 09). Like Sgr B2, this excess may be another candidate of an X-ray reflection nebula (XRN).

CH Cygni is a symbiotic star consisting of an M giant and an accreting white dwarf, which is known to be a highly variable X-ray source with a complex, two-component, spectra. Here we report on two Suzaku observations of CH Cyg, taken in 2006 January and May, during which the system was seen to be in a soft X-ray bright, hard X-ray faint state. Based on the extraordinary strength of the 6.4 keV fluorescent Fe Kα line, we show that the hard X-rays observed with Suzaku are dominated by scattering.

We describe an approach to build an x-ray mirror assembly that can meet Lynx's requirements of high-angular resolution, large effective area, light weight, short production schedule, and low-production cost. Adopting a modular hierarchy, the assembly is composed of 37,492 mirror segments, each of which measures ∼100 mm × 100 mm × 0.5 mm. These segments are integrated into 611 modules, which are individually tested and qualified to meet both science performance and spaceflight environment requirements before they in turn are integrated into 12 metashells. The 12 metashells are then integrated to form the mirror assembly. This approach combines the latest precision polishing technology and the monocrystalline silicon material to fabricate the thin and lightweight mirror segments. Because of the use of commercially available equipment and material and because of its highly modular and hierarchical building-up process, this approach is highly amenable to automation and mass production to maximize production throughput and to minimize production schedule and cost. As of fall 2018, the basic elements of this approach, including substrate fabrication, coating, alignment, and bonding, have been validated by the successful building and testing of single-pair mirror modules. In the next few years, the many steps of the approach will be refined and perfected by repeatedly building and testing mirror modules containing progressively more mirror segments to fully meet science performance, spaceflight environments, as well as programmatic requirements of the Lynx mission and other proposed missions, such as AXIS. © The Authors. Published by SPIE under a Creative Commons Attribution 4.0 Unported License. Distribution or reproduction of this work in whole or in part requires full attribution of the original publication, including its DOI.

Next generation's lightweight, high resolution, high throughput optics for x-ray astronomy requires integration of very thin mirror segments into a lightweight telescope housing without distortion. Thin glass substrates with linear dimension of 200 mm and thickness as small as 0.4 mm can now be fabricated to a precision of a few arc-seconds for grazing incidence optics. Subsequent implementation requires a distortion-free deposition of metals such as iridium or platinum. These depositions, however, generally have high coating stresses that cause mirror distortion. In this paper, we discuss the coating stress on these thin glass mirrors and the effort to eliminate their induced distortion. It is shown that balancing the coating distortion either by coating films with tensile and compressive stresses, or on both sides of the mirrors is not sufficient. Heating the mirror in a moderately high temperature turns out to relax the coated films reasonably well to a precision of about a second of arc and therefore provide a practical solution to the coating problem.