In this study, particle image velocimetry (PIV) is used to measure WC particle velocity during HVAF spraying. Measured velocities are compared with calculated velocities obtained using open source CFD software. Numerical simulation is also used to investigate particle temperatures. With the HVAF gun used, maximum particle velocity is reached around 18 mm from the nozzle exit with a corresponding gas temperature of 1400 K.
In this investigation, particle image velocimetry (PIV) and direct imaging are used to measure particle velocities during cold spraying. Four feedstock powders were sprayed, including Ni, WC-Co, carbonyl Fe, and Cr steel. Multiple exposures at 500 ns intervals were used to measure in-flight particle velocities via direct imaging with a high shutter speed camera. Velocimetry measurements were made with a double-pulse laser and a high-resolution camera. With the minimum frame straddling time set to 100 ns, a maximum particle velocity of 1052 m/s was measured.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.