An etching technique called phase-change etching was developed. In this technique, only crystalline regions in a phase-change recording film are selectively etched by an alkaline solution, and amorphous regions remain on the sample surface, which means that a phase-change recording film can be used as a resist for pattern formation. By combination of this technique and phase-change recording, fabrication of the dot pattern with a size of about 1∕10 of the fabricating spot was demonstrated. This result indicates the possibility of nanosize fabrication using the phase-change etching technique.

To realize optical discs with the sub-terabyte data capacity, we propose the three-dimensional pit selection (3DPS) method where a single data pit to be read out in a multi-layer disc is selected three-dimensionally to obtain super-resolution in the disc plane and to reduce layer cross-talk. To examine the feasibility of this method, the phase-change pit capsule method was tested where the data pits consist of a phase-change material which melts during readout. The super-resolution effect was observed for both layers of a dual-layer disc. It was shown that a quadric-layer disc can be designed because of the high transmittance of each layer. Thus, 3DPS is considered to have the potential for a data capacity of hundreds of gigabytes with a conventional optical system.

No abstract

No abstract

The DVD is acknowledged as the image and information storage media for the next generation of video, music, and computer systems and also for a broad range of other applications. The market for DVDs has already taken off, and the DVD family is looked to as being a united system for image and information. Compatibility among DVD formats is essential for the 4.7-GB DVD-RAM. The key concept of this is large capacity without placing a burden on the readout system.