No abstract

LiDAR (Light Detection and Ranging) technology has been used to obtain geometrical attributes of tree crops in small field plots, sometimes using manual steps in data processing. The objective of this study was to develop a method for estimating canopy volume and height based on a mobile terrestrial laser scanner suited for large commercial orange groves. A 2D LiDAR sensor and a GNSS (Global Navigation Satellite System) receiver were mounted on a vehicle for data acquisition. A georeferenced point cloud representing the laser beam impacts on the crop was created and later classified into transversal sections along the row or into individual trees. The convex-hull and the alpha-shape reconstruction algorithms were used to reproduce the shape of the tree crowns. Maps of canopy volume and height were generated for a 25 ha orange grove. The different options of data processing resulted in different values of canopy volume. The alpha-shape algorithm was considered a good option to represent individual trees whereas the convex-hull was better when representing transversal sections of the row. Nevertheless, the canopy volume and height maps produced by those two methods were similar. The proposed system is useful for site-specific management in orange groves.

Precision agriculture (PA) technologies are being applied to crops in Brazil, which are important to ensure Brazil's position in agricultural production. However, there are no studies available at present to indicate the extent to which PA technologies are being used in the country. Therefore, the main objective of this research was to investigate how the sugar-ethanol industry in São Paulo state, which produces 60% of the domestic sugarcane, is adopting and using these techniques. For this purpose, primary data were used, which were obtained from a questionnaire sent to all companies operating in the sugarethanol industry in the region. The aim was to determine to what extent these companies are adopting and using PA technologies, and also to promote a more in-depth discussion of the topic within the sugar-ethanol industry. Information was obtained on the features of the companies, on sources of information that they use for adopting these technologies, on their impacts on these companies and on obstacles hindering their adoption. The main conclusions of this research suggest that companies that adopt and use PA practices reap benefits, such as managerial improvements, higher yields, lower costs, minimization of environmental impacts and improvements in sugarcane quality.

Ultrasonic and light detection and ranging (LiDAR) sensors have been some of the most deeply investigated sensing technologies within the scope of digital horticulture. They can accurately estimate geometrical and structural parameters of the tree canopies providing input information for high-throughput phenotyping and precision horticulture. A review was conducted in order to describe how these technologies evolved and identify the main investigated topics, applications, and key points for future investigations in horticulture science. Most research efforts have been focused on the development of data acquisition systems, data processing, and high-resolution 3D modeling to derive structural tree parameters such as canopy volume and leaf area. Reported applications of such sensors for precision horticulture were restricted to real-time variable-rate solutions where ultrasonic or LiDAR sensors were tested to adjust plant protection product or fertilizer dose rates according to the tree volume variability. More studies exploring other applications in site-specific management are encouraged; some that integrates canopy sensing data with other sources of information collected at the within-grove scale (e.g., digital elevation models, soil type maps, historical yield maps, etc.). Highly accurate 3D tree models derived from LiDAR scanning demonstrate their great potential for tree phenotyping. However, the technology has not been widely adopted by researchers to evaluate the performance of new plant varieties or the outcomes from different management practices. Commercial solutions for tree scanning of whole groves, orchards, and nurseries would promote such adoption and facilitate more applied research in plant phenotyping and precision horticulture.

Nitrogen management has been intensively studied on several crops and recently associated with variable rate on-the-go application based on crop sensors. Such studies are scarce for sugarcane and as a biofuel crop the energy input matters, seeking high positive energy balance production and low carbon emission on the whole production system. This article presents the procedure and shows the first results obtained using a nitrogen and biomass sensor (N-Sensor TM ALS, Yara International ASA) to indicate the nitrogen application demands of commercial sugarcane fields. Eight commercial fields from one sugar mill in the state of São Paulo, Brazil, varying from 15 to 25 ha in size, were monitored. Conditions varied from sandy to heavy soils and the previous harvesting occurred in May and October 2009, including first, second, and third ratoon stages. Each field was scanned with the sensor three times during the season (at 0.2, 0.4, and 0.6 m stem height), followed by tissue sampling for biomass and nitrogen uptake at ten spots inside the area, guided by the different values shown by the sensor. The results showed a high correlation between sensor values and sugarcane biomass and nitrogen uptake, thereby supporting the potential use of this technology to develop algorithms to manage variable rate application of nitrogen for sugarcane.