A detection method for type-II pyrethroids in an environmental water sample using a microfluidic paper-based analytical device (µPAD) is reported here. The detection approach is based on the formation of cyanide from the hydrolysis of type-II pyrethroids and the colorimetric detection of cyanide on a layer-based µPAD. Parafilm and inexpensive laminating pouches were used to create a hydrophobic barrier for the assay on the µPAD. This detection approach was selective to type-II pyrethroids in water for which an environmental water sample was tested. The calibration curves for cypermethrin, deltamethrin, cyhalothrin, and fenvalerate ranged from 2 to 40 µg/mL without sample preconcentration. The lower concentrations of type-II pyrethroids can be assessed by including a preconcentration step prior to the detection on a µPAD. This detection system provides an alternative platform for fast, semiquantitative testing for pesticide contamination in environmental surface water by allowing for portability, low reagent/sample consumption, and low-cost testing.
Main text The CCQM-K154.b comparison was coordinated by the Bureau International des Poids et Mesures (BIPM) and the Chinese National Institute of Metrology (NIM) on behalf of the Organic Analysis Working Group (OAWG) of the Comité Consultatif pour la Quantité de Matière (CCQM) for National Measurement Institutes (NMIs) and Designated Institutes (DIs) which provide measurement services in organic analysis under the 'Comité International des Poids et Mesures' Mutual Recognition Arrangement (CIPM MRA) and/or have participated in the BIPM's Mycotoxin Metrology Capacity Building and Knowledge Transfer (MMCBKT) project as part of its "Metrology for Safe Food and Feed in Developing Economies" Capacity Building Programme. Gravimetrically-prepared solutions having an assigned mass fraction of specified organic analytes are routinely used to calibrate measurement processes for the quantification of the same analytes in matrix samples. Appropriate assignments of the property value and associated uncertainty of calibration solutions thus underpin the traceability of routine analysis and are critical for accurate measurements. Evidence of successful participation in relevant international comparisons is needed to document calibration and measurement capability claims (CMCs) made by national metrology institutes and designated institutes. In total, eleven NMIs/DIs participated in the Track C, Model II, Key Comparison CCQM-K154.b [Gravimetric preparation and value assignment of aflatoxin B1 (AfB1) in acetonitrile (ACN)] for emerging areas of global interest and innovation. Participants were requested to gravimetrically prepare calibration solutions and value assign the mass fractions, expressed in mg/kg, of aflatoxin B1 (AfB1) in the acetonitrile (ACN) solution. Study samples, with assigned values and associated uncertainties were prepared by the comparison participants and sent to the coordinating laboratory for comparison. The Key Comparison Reference Values (KCRVs), calculated form values measured by the coordinating laboratory based on calibrations obtained from independent gravimetrically prepared calibrant solutions, agreed with participants reported values, within their stated uncertainties. AfB1 was selected to be representative of polar aflatoxins. Aflatoxins are a class of mycotoxins generally produced by fungi of the genus Aspergillus. It was anticipated to provide a challenge representative for the gravimetrical preparation and value assignment of calibration solutions in the mass fraction range of 2 mg/kg to 50 mg/kg of mycotoxins with broadly similar structural characteristics. Nine participants of the MMCBKT programme were provided with a stock solution having a known AfB1 mass fraction and expanded uncertainty to use to gravimetrically prepare and value assign a calibration solution. Three NMIs/DIs also participated using their own calibration solutions. The use of in-house solutions required an additional capacity to undertake a fit-for-purpose purity assessment. NIM was the only NMI participating using both the MMCBKT based and their own in-house assigned solutions in order to connect the two different groups. It was decided to propose separate KCRVs for each of the two ampoules provided by the participating NMIs/DIs based on the AfB1 mass fraction. This allowed participants to demonstrate the efficacy of their implementation of the approaches used to gravimetrically prepare calibration solutions and to assess the AfB1 mass fraction. The majority of the AfB1 mass fraction KCRVs (wKCRV) for CCQM-K154.b spanned a mass fraction range of 2.02 mg/kg to 31.57 mg/kg. The relative expanded uncertainties U(wKCRV) ranged from 0.69 % to 2.93 %. Inspection of the degree of equivalence plots for the AfB1 mass fraction assignments in CCQM-K154.b indicated that there was an excellent agreement of results. Solely, the AfB1 mass fraction assignments of INRAP did not agree with the KCRVs. It was found that the samples were altered as a result of an acid contamination. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database https://www.bipm.org/kcdb/. The final report has been peer-reviewed and approved for publication by the CCQM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).
In this paper we present a novel fabrication technique that utilizes polycaprolactone (PCL) as bonding media due to its low melting temperature property. PCL is biodegradable polyester with a melting point of 60°C, and a glass transition temperature of -60°C [1-10]. It is employed as a rapid bonding technique in the fabrication process that readily produces complete microfluidic chips. The microchannels are produced via laser ablation micromachining and thermal embossing, followed by bonding with PCL. The PCL is uniformly coated on a piece of polymer sheet to produce a thin film on its surface. A complete microfluidic channel is formed by enclosing the open channel with the PCL-coated polymer piece. This fabrication technique lends itself readily to various polymers, such as (poly)methylmethacrylate (PMMA), polycarbonate (PC), polyetherimide (PEI), and poly(ethylene terephthalate) (PETE), facilitating device production for a variety of application, even permitting hybrid polymer chips. The bonding was performed rapidly at 60°C. This approach provides a more direct method to generate hard polymer microfluidic chips than classical techniques and is therefore highly amendable to rapid prototyping. This work also explores the use of PCL as an alternative approach to making simple, costeffective universal adhesive for bonding interconnects. Bonding is performed at 60°C, by placing the adhesive layer in between an interconnect port and a microchip. This method allows for connections to be made easily and quickly.
The CCQM-K78.a comparison was coordinated by the BIPM on behalf of the CCQM Organic Analysis Working Group for NMIs and DIs which provide measurement services in organic analysis under the CIPM MRA. The key comparison forms part of the OAWG 10-year strategic plan of comparisons. CCQM-K78.a underpins the demonstration of capabilities for value assignment of high polarity calibration solutions. The model system selected was amino acids in aqueous solution. Participants were required to assign the mass fractions, expressed in μg/g, of phenylalanine (Phe), leucine (Leu), isoleucine (Ile) and proline (Pro) present in solution in 0.01 N hydrochloric acid. The content and analytical challenges of the selected analytes are representative of those for typical calibration solutions for polar organic analytes in aqueous solution. Participation in CCQM-K78, a benchmarked measurement capability for assigning the mass fraction content of polar organic compounds (pKow > -2) present at a mass fraction range between 50 μg/g and 500 μg/g in an aqueous solution. It also tested capabilities for the quantitative assignment of isomeric polar compounds of similar chromatographic retention time properties. A satisfactory level of agreement of the results was obtained between participants and with gravimetric values for amino acid content. In the cases where the agreement was not satisfactory, the participants were able to identify a technical cause for the inconsistency. The comparison demonstrated the trueness and precision of double IDMS-based methods as a primary measurement procedure for the quantification of polar analytes in aqueous solution when an isotopically labelled version of the analyte is available as the internal standard. It also demonstrated that amino acid quantification using pre- or post-column derivatization with UV or FLD detection can provide results with comparable levels of performance. In this case, where the purity of the primary calibrators had been assigned with a relative standard uncertainty below 0.2%, results consistent with the KCRV within a relative expanded uncertainty in the range 1% - 2% could be realized and levels of 2%-4% were routinely achieved. KEY WORDS FOR SEARCH Amino acid quantification, leucine, isoleucine, proline, phenylalanine, calibration solution, standard solution, IDMS, primary measurement procedure, polar solution, peptide quantification Main text To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCQM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.