To address the competing relationship between tuber damage and soil removal in potato combine harvesting, this study investigated the operating mechanism of a belt-rod type separator of a small-scale self-propelled potato combine harvester and the separation performance between tuber and soil. The main factors affecting the tuber-soil separation characteristics were derived from a theoretical analysis of the belt-rod angle, belt-rod linear velocity, and harvester forward speed. A simulation model based on DEM (Discrete Element Method)-MBD (Multibody Dynamics) coupling was constructed and single-factor simulation tests were carried out. Then a three-factor, three-level Box–Behnken test was conducted using the coefficient of force on the tuber and soil clearing rate as response indicators. The optimal combination of parameters resulting in low tuber damage and high soil clearing rate was obtained by solving the regression equations. The optimal parameters were a belt-rod angle of 17.5°, a belt-rod linear velocity of 1.37 m/s, and a harvester forward speed of 0.80 m/s. The simulation model was validated by field experiments and the error between the simulation model and the field harvest was found to be 3.81%. The results can be used as a reference for parameter optimization of small-scale potato combine harvesters and coupled DEM-MBD simulation of tuber-soil separation.
In this study, we quantified and analyzed the root-cutting process of garlic with a test bench with pressure sensors on the basis of the comparative analysis of various information perception methods. On the basis of the output value of the pressure sensor, the force curve of garlic roots was plotted, and the double round blade cutting module is optimized on the basis of the force curve diagram. The innovative proposal of slotted round blades for garlic root cutting is presented here. The round blade diameter is 110 mm, the center distance is 100 mm, the blade thickness is 1 mm, and the blade speed is 1200 r/min. According to the analysis of the force curve, it was found that the slotted round blade with the slanted blade could generate a strong thrust to cut the roots. The cutting effect was better and the cutting surface of the roots was straight. The slotted blade meets the need for cutting garlic roots.
Potato stem removal is one of the critical technical problems of potato mechanized harvesting; it directly affects the quality of potato harvesting and potato storage. There have been several studies on potato stem removal mechanisms. In practice, however, it was found that the potato stem removal rate was greatly influenced by the posture of the stem before it entered the removal mechanism. In this study, we designed a potato stem posture adjustment mechanism consisting of elastic curtains. A test rig was built to investigate the effect of curtain height, curtain width, and curtain suspension height on potato passage rate and potato stem removal rate. The Box–Behnken design (BBD), combined with the response surface method, was used to conduct the test. The optimal construction and installation parameters for each elastic curtain were determined as 278.93 mm for the curtain height, 20 mm for the curtain width, and 260 mm for the curtain suspension height. The predicted values of potato passage rate and potato stem removal rate under the optimal parameters were 92.36% and 82.83%, which were consistent with the validation test results. Based on the optimization results, a rigid-flexible coupled simulation model for a potato stem transported-posture adjustment process based on Abaqus and Adams was constructed. The maximum impact of the elastic curtain of the stem posture adjustment mechanism on the potato stem was 15.91 N and caused the stem to spring back. The projection angle β′ of the stem posture angle in the xoz plane before posture adjustment was 19.07°, and the β′ of the stem after posture adjustment was 87.18°. At this time, the stem was basically parallel to the rod of the separating sieve and had a high probability of falling from the gap of the bar to complete the removal of the stem. Overall, the stem transport position adjustment mechanism effectively adjusted the stem transported posture and improved the stem removal rate in potato mechanical harvesting.
Potato stems removal is an important part of mechanized potato harvesting. However, there is still limited research on the physical properties of potato stems, especially the determination of Poisson’s ratio and Young’s modulus. This study determined the Poisson’s ratio and Young’s modulus of the potato main stems at different heights above the ground. Since the Potato stems are viscoelastic cylinders with non-standard circular cross-sections and complex textures, the existing determination methods are difficult to apply. We propose a new method to determine Poisson’s ratio and Young’s modulus by combining image processing in the mechanical compression process. The feasibility of this method was verified by determining the hardness value of 65 Shore ‘A’ nitrile rubber specimens, and the measured Poisson’s ratio and Young’s modulus were close to the relevant literature. This method can be used for the determination of potato stems. Atlantic potatoes are widely grown for their high solids content, resistance to pests and diseases, and good processing quality. Ten Atlantic potato main stems were randomly selected at harvest time. Specimens with a length of 11 ± 1 mm were taken at 0 cm, 10 cm, 20 cm, and 30 cm above the ground from each stem. The average values of the axial Poisson’s ratio were determined as: 0.21, 0.28, 0.30, 0.32, and the axial Young’s modulus as: 15.90 MPa, 12.38 MPa, 11.68 MPa, 11.28 MPa. This study has provided critical basic data for the discrete element model construction of potato stems and numerical simulation of potato haulm killers and potato harvesters, which is beneficial for improving the harvest quality of potato. It also provides new ideas for Poisson’s ratio and Young’s modulus measurement of non-regular cross-sectional cylindrical viscoelastic materials.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.