A novel reagent for low-level detection in immunoadsorbent assays is described. The reagent consists of gold nanoparticles modified to integrate bioselective species (e.g., antibodies) with molecular labels for the generation of intense, biolyte-selective surface-enhanced Raman scattering (SERS) responses in immunoassays and other bioanalytical applications. The reagent is constructed by coating gold nanoparticles (30 nm) with a monolayer of an intrinsically strong Raman scatterer. These monolayer-level labels are bifunctional by design and contain disulfides for chemisorption to the nanoparticle surface and succinimides for coupling to the bioselective species. There are two important elements in this label design; it both minimizes the separation between label and particle surface and maximizes the number of labels on each particle. This approach to labeling also exploits several other advantages of SERS-based labels: narrow spectral bandwidth, resistance to photobleaching and quenching, and long-wavelength excitation of multiple labels with a single excitation source. The strengths of this strategy are demonstrated in the detection of free prostate-specific antigen (PSA) using a sandwich assay format based on monoclonal antibodies. Detection limits of approximately 1 pg/mL in human serum and approximately 4 pg/mL in bovine serum albumin have been achieved with a spectrometer readout time of 60 s. The extension of the method to multianalyte assays (e.g., the simultaneous determination of the many complexed forms of PSA) is discussed.

A spectroscopic assay based on surface enhanced Raman scattering (SERS) using silver nanorod array substrates has been developed that allows for rapid detection of trace levels of viruses with a high degree of sensitivity and specificity. This novel SERS assay can detect spectral differences between viruses, viral strains, and viruses with gene deletions in biological media. The method provides rapid diagnostics for detection and characterization of viruses generating reproducible spectra without viral manipulation.

Aligned Ag nanorod arrays have been fabricated on glass substrates using an oblique angle vapor deposition (OAD) method. The surface morphology and structure of the Ag rods were studied by scanning electron microscopy, transmission electron microscopy, and X-ray diffraction. Individual nanorods were found to be primarily cylindrical, albeit with irregularly shaped surface protrusions of the rods. The surface enhanced Raman scattering (SERS) response as a function of nanorod length was investigated using trans-1,2-bis(4pyridyl)ethene as a probe molecule at an excitation wavelength of 785 nm. The enhancement factors reached a maximum of ∼5 × 10 8 as the nanorod length approached 868 nm and then decreased to ∼3 × 10 6 as the nanorod length increased further to 1900 nm. For the 868 nm nanorod array, signals collected over multiple spots within the same substrate resulted in a relative standard deviation (RSD) of 10%, while an RSD of 15% was measured in signals collected from different substrates. When stored in a food vacuum bag, the substrates are stable with respect to SERS intensity for greater than 2 months. This study demonstrates that the OAD Ag nanorod arrays are highly sensitive, uniform, and stable SERS substrates that are suitable for a variety of surface chemical analysis applications.

The need for rapid, highly sensitive, and versatile diagnostic tests for viral pathogens spans from human and veterinary medicine to bioterrorism prevention. As an approach to meet these demands, a diagnostic test employing monoclonal antibodies (mAbs) for the selective extraction of viral pathogens from a sample in a chip-scale, sandwich immunoassay format has been developed using surface-enhanced Raman scattering (SERS) as a readout method. The strengths of SERS-based detection include its inherent high sensitivity and facility for multiplexing. The capability of this approach is demonstrated by the capture of feline calicivirus (FCV) from cell culture media that is exposed to a gold substrate modified with a covalently immobilized layer of anti-FCV mAbs. The surface-bound FCVs are subsequently coupled with an extrinsic Raman label (ERL) for identification and quantification. The ERLs consist of 60-nm gold nanoparticles coated first with a layer of Raman reporter molecules and then a layer of mAbs. The Raman reporter molecule is strategically designed to chemisorb as a thiolate adlayer on the gold nanoparticle, to provide a strong and unique spectral signature, and to covalently link a layer of mAbs to the gold nanoparticle. The last feature provides a means to selectively tag substrate-bound FCV. This paper describes the development of the assay, which uses cell culture media as a sample matrix and has a linear dynamic range of 1 x 10(6)-2.5 x 10(8) viruses/mL and a limit of detection of 1 x 10(6) viruses/mL. These results reflect the findings from a detailed series of investigations on the effects of several experimental parameters (e.g., salt concentration, ERL binding buffer, and sample agitation), all of which were aimed at minimizing nonspecific binding and maximizing FCV binding efficiency. The performance of the assay is correlated with the number of captured FCV, determined by atomic force microscopy, as a means of method validation.