No abstract

No abstract

The University of Minnesota Center for Diesel Research along with a research team including Caterpillar, Cummins, Carnegie Mellon University, West Virginia University (WVU), Paul Scherrer Institute in Switzerland, and Tampere University in Finland have performed measurements of Diesel exhaust particle size distributions under real-world dilution conditions. A mobile aerosol emission laboratory (MEL) equipped to measure particle size distributions, number concentrations, surface area concentrations, particle bound PAHs, as well as CO 2 and NO x concentrations in real time was built and will be described. The MEL was used to follow two different Cummins powered tractors, one with an older engine (L10) and one with a state-of-the-art engine (ISM), on rural highways and measure particles in their exhaust plumes. This paper will describe the goals and objectives of the study and will describe representative particle size distributions observed in roadway experiments with the truck powered by the ISM engine.

No abstract

The continuously regenerating trap (CRT) is a diesel exhaust emission control that removes nearly all diesel particulate matter on a mass basis, but under some circumstances oxidation of sulfur leads to the formation of nanoparticles. The objective of the four year study was to determine CRT performance under controlled, real-world, on-road conditions, and to develop quantitative relationships between fuel and lubrication oil sulfur concentration and particle number exhaust emissions. It was shown that nanoparticle emissions are minimized by the use of ultralow sulfur fuels and specially formulated low sulfur lubrication oil. Nanoparticle emissions increased with higher exhaust temperatures. Fuel and lubrication oil sulfur increased the particle concentration by, on average, 36 x 10(6) and 0.14 x 10(6) part/cm3 for each 1 ppm increase in sulfur. On the other hand there was a decrease in nanoparticle emissions by the CRT as the system aged.