Multijunction III-V concentrator cells of several different types have demonstrated solar conversion efficiency over 40% since 2006, and represent the only third-generation photovoltaic technology to enter commercial power generation markets so far. The next stage of solar cell efficiency improvement, from 40% to 50%-efficient production cells, is perhaps the most important yet, since it is in this range that concentrator photovoltaic (CPV) systems can become the lowest cost option for solar electricity, competing with conventional power generation without government subsidies. The impact of 40% and 50% cell efficiency on cost-effective geographic regions for CPV systems is calculated in the continental US, Europe, and North Africa. We take a systematic look at a progression of multijunction cell architectures that will take us up to 50% efficiency, using modeling grounded in well-characterized solar cell materials systems of today's 40% cells, discussing the theoretical, materials science, and manufacturing considerations for the most promising approaches. The effects of varying solar spectrum and current balance on energy production in 4-junction, 5-junction, and 6-junction terrestrial concentrator cells are shown to be noticeable, but are far outweighed by the increased efficiency of these advanced cell designs. Production efficiency distributions of the last five generations of terrestrial concentrator solar cells are discussed. Experimental results are shown for a highly manufacturable, upright metamorphic 3-junction GaInP/GaInAs/Ge solar cell with 41.6% efficiency independently confirmed at 484 suns (48.4 W/cm 2 ) (AM1.5D, ASTM G173-03, 25 C), the highest demonstrated for a cell of this type requiring a single metalorganic vapor-phase epitaxy growth run.

The high efficiency of multijunction concentrator cells has the potential to revolutionize the cost structure of photovoltaic electricity generation. Advances in the design of metamorphic subcells to reduce carrier recombination and increase voltage, wide-band-gap tunnel junctions capable of operating at high concentration, metamorphic buffers to transition from the substrate lattice constant to that of the epitaxial subcells, concentrator cell AR coating and grid design, and integration into 3-junction cells with current-matched subcells under the terrestrial spectrum have resulted in new heights in solar cell performance. A metamorphicGa0.44In0.56P/Ga0.92In0.08As/ Ge 3-junction solar cell from this research has reached a record 40.7% efficiency at 240 suns, under the standard reporting spectrum for terrestrial concentrator cells (AM1.5 direct, low-AOD, 24.0W/cm2,25∘C), and experimental lattice-matched 3-junction cells have now also achieved over 40% efficiency, with 40.1% measured at 135 suns. This metamorphic 3-junction device is the first solar cell to reach over 40% in efficiency, and has the highest solar conversion efficiency for any type of photovoltaic cell developed to date. Solar cells with more junctions offer the potential for still higher efficiencies to be reached. Four-junction cells limited by radiative recombination can reach over 58% in principle, and practical 4-junction cell efficiencies over 46% are possible with the right combination of band gaps, taking into account series resistance and gridline shadowing. Many of the optimum band gaps for maximum energy conversion can be accessed with metamorphic semiconductor materials. The lower current in cells with 4 or more junctions, resulting in lowerI2Rresistive power loss, is a particularly significant advantage in concentrator PV systems. Prototype 4-junction terrestrial concentrator cells have been grown by metal-organic vapor-phase epitaxy, with preliminary measured efficiency of 35.7% under the AM1.5 direct terrestrial solar spectrum at 256 suns.

No abstract

No abstract

No abstract