A second-generation bio-based feedstock—tall oil fatty acids—was epoxidised via two pathways. Oxirane rings were introduced into the fatty acid carbon backbone using a heterogeneous epoxidation catalyst-ion exchange resin Amberlite IR-120 H or enzyme catalyst Candida antarctica lipase B under the trade name Novozym® 435. High functionality bio-polyols were synthesised from the obtained epoxidated tall oil fatty acids by oxirane ring-opening and subsequent esterification reactions with different polyfunctional alcohols: trimethylolpropane and triethanolamine. The synthesised epoxidised tall oil fatty acids (ETOFA) were studied by proton nuclear magnetic resonance. The chemical structure of obtained polyols was studied by Fourier-transform infrared spectroscopy and size exclusion chromatography. Average molecular weight and polydispersity of polyols were determined from size exclusion chromatography data. The obtained polyols were used to develop rigid polyurethane (PU) foam thermal insulation material with an approximate density of 40 kg/m3. Thermal conductivity, apparent density and compression strength of the rigid PU foams were determined. The rigid PU foams obtained from polyols synthesised using Novozym® 435 catalyst had superior properties in comparison to rigid PU foams obtained from polyols synthesised using Amberlite IR-120 H. The developed rigid PU foams had an excellent thermal conductivity of 21.2–25.9 mW/(m·K).
Birch-bark triterpenoids and their semi-synthetic derivatives possess a wide range of biological activities including cytotoxic effects on various tumour cell lines. However, due to the low solubility and bioavailability, their medicinal applications are rather limited. The use of various nanotechnology-based drug delivery systems is rapidly developing approach to the solubilisation of insufficiently bioavailable pharmaceuticals. Herein, the drug delivery systems deemed to be applicable for birch-bark triterpenoid structures are reviewed. The aforementioned disadvantages of birch-bark triterpenoids and their semi-synthetic derivatives can be overcome through their incorporation into organic nanoparticles, which include various dendrimeric systems, as well as embedding the active compounds into polymer matrices or complexation with carbohydrate nanoparticles without covalent bonding. Some of the known triterpenoid delivery systems consist of nanoparticles featuring inorganic cores covered with carbohydrates or other polymers. Methods for delivering the title compounds through encapsulation and emulsification into lipophilic media are also suitable. Besides, the birch-bark triterpenoids can form self-assembling systems with increased bio-availability. Even more, the self-assembling systems are used as carriers for delivering other chemotherapeutic agents. Another advantage besides increased bioavailability and anticancer activity is the reduced overall systemic toxicity in most of the cases, when triterpenoids are delivered with any of the carriers.
The valuable products that can be isolated from spent coffee ground (SCG) biomass consist of a high number of bioactive components, which are suitable for further application as raw materials in various production chains. This paper presents the potential value of the SCG obtained from large and local coffee beverage producers, for the production of valuable, biologically active products. Despite its high potential, SCG has not been utilized to its full potential value, but is instead discarded as waste in landfills. During its decomposition, SCG emits a large amount of CO2 and methane each year. The main novelty of our work is the implementation of sequential extraction with solvents of increased polarity that allows for the maximal removal of the available extractives. In addition, we have compared different extraction techniques, such as conventional and Soxhlet extraction, with more effective accelerated solvent extraction (ASE), which has seen relatively little use in terms of SCG extraction. By comparing these extraction methods and highlighting the key differences between them in terms of extraction yield and obtained extract composition, this work offers key insights for further SCG utilization. By using sequential and one-step accelerated solvent extraction, it is possible to obtain a significant number of extractives from SCG, with a yield above 20% of the starting biomass. The highest yield is for coffee oil, which is obtained with n-hexane ranging between 12% and 14% using accelerated solvent extraction (ASE) according to the scheme: n-hexane→ethyl acetate→60% ethanol. Using single-stage extraction, increasing the ethanol concentration also increases the total phenolic content (TPC) and it ranges between 18.7–23.9 Gallic acid equivalent (GAE) mg/g. The iodine values in the range of 164–174 using ASE and Soxhlet extraction shows that the hexane extracts contain a significant amount of unsaturated fatty acids; coffee oils with a low acid number, in the range of 4.74–6.93, contain few free fatty acids. The characterization of separated coffee oil has shown that it mainly consists of linoleic acid, oleic acid, palmitic acid, stearic acid and a small number of phenolic-type compounds.
This paper deals with studies of the content of some antioxidants in barley (Hordeum vulgare L.), which is one of the major cereal species with extensive application in food products with increased nutritional value. We studied the effect of genotype and environment on the content of α-tocopherol and total polyphenol content in grain and grain oil and phenolic compounds in grain of two covered and four hulless barley genotypes grown under one organic and three conventional management systems with increasing agrochemical input during 2011-2012. α-Tocopherol in grain and oil during both years ranged between 1.49-14.51 mg kg-1 and 9.24-88.32 mg 100 g-1 , respectively, with particularly low values in comparatively cooler and wetter year 2012. Total polyphenol content in grain and oil ranged between 81.66-140.13 and 0.19-8.52 mg gallic acid equivalents (GAE) 100 g-1 , respectively. We identified 13 phenolic compounds with the highest concentration for ferulic acid, followed by p-coumaric and syringic acids. No clear significant effect of crop management systems on the content of antioxidants was found. Conditions of the growing year had the greatest effect on the content of α-tocopherol, total polyphenol content and most phenolic compounds. α-Tocopherol content in barley grain and oil was generally higher under conventional management with higher input level; higher mean content was found for some hulless genotypes, although there was no significant difference between hulless and covered types. Higher total polyphenol content in grain was generally found under organic and lower input conventional management systems. Total polyphenol content was higher for covered barley genotypes in comparison to hulless genotypes. Higher total polyphenol content concentration in oil was found under medium intensive conventional management with covered genotypes being superior in 2011. The content of most phenolic compounds tended to increase with decrease of agrochemical input level and higher content was in covered than in hulless genotypes with some exceptions.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.