No abstract

The micro structural evolution of an AZ31 rolled sheet during dynamic deformation at strain rates of ~10 3 s _1 has been investigated by electron backscatter diffraction, X-ray and neutron diffraction. The influence of orientation on the predominant deformation mechanisms and on the recovery processes taking place during deformation has been systematically examined. The results have been compared with those corresponding to the same alloy tested quasi-statically under equivalent conditions. It has been found that strain rate enhances the activation of {101 2} extension twinning dramatically, while contraction and secondary twinning are not significantly influenced. The polarity of {1 012} extension twinning is even reversed in some grains under selected testing conditions. Significant grain subdivision by the formation of geometrically necessary boundaries (GNBs) takes place during both quasi-static and dynamic deformation of this AZ31 alloy. It is remarkable that GNBs of high misorientations form even at the highest strain rates. The phenomenon of recovery has been found to be orientation dependent.

No abstract

No abstract

Three thermodynamic databases of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), derived using the Group Additivity approach and two computational molecular modeling methods, Modified Neglect of Diatomic Overlap (MNDO) and Parametrized Model 3 (PM3), respectively, combined with the Scientific Group Thermodata Europe (SGTE) database have been used to model the formation of PCDD/Fs in thermal processes, such as iron ore sintering process. The predictions using the three different databases are compared, and similar thermodynamic conditions of PCDD/Fs formation are found. The comparison of the calculated values with measured results obtained from industrial iron ore sinter plant indicates that the PCDDs and PCDFs found in practice are not in equilibrium with each other. While within each dioxin and furan homologue equilibrium between the isomers appears to be established in industrial processes, reactions between dioxins and furans seem to be kinetically inhibited. This view has been supported by assuming no reaction at all between PCDFs and PCDDs in the simulation. With this assumption, both PCDFs and PCDDs reached partial pressures between 600 and 800 K in the order of magnitude actually found in practice. Taking this restriction into account, the conditions for PCDD/Fs formation were calculated as a function of oxygen partial pressure; temperature; concentrations of carbon, hydrogen, and chlorine; and C/H ratio.