Analytical expressions for the anodic stripping voltammetry of metallic nanoparticles from an electrode are provided. First, for reversible electron transfer, two limits are studied: that of diffusionally independent nanoparticles and the regime where the diffusion layers originating from each particle overlap strongly. Second, an analytical expression for the voltammetric response under conditions of irreversible electron transfer kinetics is also derived. These equations demonstrate how the peak potential for the stripping process is expected to occur at values negative of the formal potential for the redox process in which the surface immobilised nanoparticles are oxidised to the corresponding metal cation in the solution phase. This work is further developed by considering the surface energies of the nanoparticles and its effect on the formal potential for the oxidation. The change in the formal potential is modelled in accordance with the equations provided by Plieth [J. Phys. Chem., 1982, 86, 3166-3170]. The new analytical expressions are used to investigate the stripping of silver nanoparticles from a glassy carbon electrode. The relative invariance of the stripping peak potential at low surface coverages of silver is shown to be directly related to the surface agglomeration of the nanoparticles.

The influence of capping agents on the oxidation of silver nanoparticles was studied by using the electrochemical techniques of anodic stripping voltammetry and anodic particle coulometry ("nano-impacts"). Five spherical silver nanoparticles each with a different capping agent (branched polyethylenimine (BPEI), citrate, lipoic acid, polyethylene glycol (PEG) and polyvinylpyrrolidone (PVP)) were used to perform comparative experiments. In all cases, regardless of the capping agent, complete oxidation of the single nanoparticles was seen in anodic particle coulometry. The successful quantitative detection of the silver nanoparticle size displays the potential application of anodic particle coulometry for nanoparticle characterisation. In contrast, for anodic stripping voltammetry using nanoparticles drop casting, it was observed that the capping agent has a very significant effect on the extent of silver oxidation. All five samples gave a low oxidative charge corresponding to partial oxidation. It is concluded that the use of anodic stripping voltammetry to quantify nanoparticles is unreliable, and this is attributed to nanoparticle aggregation.

Cystic fibrosis is a common disease which has an associated characteristic symptom of high sweat chloride content. Thus, chloride ion quantification in sweat is important towards the screening of cystic fibrosis. Electrochemical methods, being cost effective and convenient, can be exploited for this. The electrochemical oxidation of silver nanoparticles in the absence of chloride ions gives one voltammetric signal related to the oxidation of silver to silver ions. The presence of chloride ions in the solution causes the appearance of an additional signal at a lower potential which is related to the oxidation of silver to silver chloride. This signal has a peak height which correlates linearly with the concentration of chloride ions from 2 mM to 40 mM when the electrochemical experiments are performed on silver nanoparticle modified screen printed electrodes. Thus, reliable quantification was found to be achievable. Furthermore, chloride ion levels of diluted synthetic sweat samples are measured accurately with the modified electrodes. Thus, the detection of the chloride ion concentration with a silver nanoparticle modified electrode provides a proof-of-concept for a point-of-care system for preliminary screening of cystic fibrosis.

CTAB (cetyltrimethylammonium bromide) micelles are detected directly via the novel electrochemical method of ‘nano-impacts’ through oxidation of its bromide content.