Rails are often joined by welding and about 80±90 per cent of tracks are welded using thē ash-butt welding method. As the result of the welding process, high tensile residual stresses are induced in the web region of the rail, at and near the welded zone. Since the main part of the welded zone is coarse grained and has porosities and inclusions, the web part of the rail is susceptible to failure. The magnitude of the induced stresses may be reduced by stress-relieving heat treatment, but in practice the heat treatment process is not used as it is very time consuming and adds to overall project costs. In this paper, microscopic studies were performed on the welded zone in the head, the web and the base parts of the rail. The e ects of local induction heat treatments on the microstructure and on the resultant tensile residual stresses in the web region were studied. To do this, ®rstly, dilatometery specimens were prepared from the base metal of the rail. These were heat-treated under di erent induction heat treatment cycles and the resulting phase transformation and the changes in the length of the specimens were obtained. Secondly, the e ects of local induction heat treatments on the residual stress ®eld in the welded zone of the rail were investigated using ®nite element analysis. Finally, a local induction hardening and tempering heat treatment is proposed to reduce the residual stresses in the web region of a welded rail.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.