In this work, a concept is described for how the kinetics of photoinduced, transient, long-lived, nonfluorescent or weakly fluorescent states of fluorophore marker molecules can be extracted from the time-averaged fluorescence by using time-modulated excitation. The concept exploits the characteristic variation of the population of these states with the modulation parameters of the excitation and thereby circumvents the need for time resolution in the fluorescence detection. It combines the single-molecule sensitivity of fluorescence detection with the remarkable environmental responsiveness obtainable from long-lived transient states, yet does not in itself impose any constraints on the concentration or the fluorescence brightness of the sample molecules that can be measured. Modulation of the excitation can be performed by variation of the intensity of a stationary excitation beam in time or by repeated translations of a CW excitation beam with respect to the sample. As a first experimental verification of the approach, we have shown how the triplet-state parameters of the fluorophore rhodamine 6G in different aqueous environments can be extracted. We demonstrate that the concept is fully compatible with low time-resolution detection by a CCD camera. The concept opens for automated transient-state monitoring or imaging on a massively parallel scale and for high-throughput biomolecular screening as well as for more fundamental biomolecular studies. The concept should also be applicable to the monitoring of a range of other photoinduced nonfluorescent or weakly fluorescent transient states, from which subtle changes in the immediate microenvironment of the fluorophore marker molecules can be detected.
Single chains of the conjugated polymer MEH-PPV (poly(2-methoxy-5-(2'-ethylhexyloxy)-1,4-phenylenevinylene)) were studied with wide-field fluorescence microscopy (dispersion in inert polymer matrices) and with fluorescence correlation spectroscopy (chloroform solution). The fluorescence yield of individual molecules in matrices was found to be 1-2 orders of magnitude lower than that in solution and it decreased substantially with increasing chain length. It suggests that isolation of MEH-PPV molecules in polymer matrices creates favorable conditions for photogeneration of nonemissive primary excited states.
Some rights reserved. The terms and conditions for the reuse of this version of the manuscript are specified in the publishing policy. For all terms of use and more information see the publisher's website. This is the final peer-reviewed author's accepted manuscript (postprint) of the following publication:This item was downloaded from IRIS Università di Bologna (https://cris.unibo.it/).When citing, please refer to the published version.
BackgroundThe main role of pretreatment is to reduce the natural biomass recalcitrance and thus enhance saccharification yield. A further prerequisite for efficient utilization of all biomass components is their efficient fractionation into well-defined process streams. Currently available pretreatment methods only partially fulfill these criteria. Steam explosion, for example, excels as a pretreatment method but has limited potential for fractionation, whereas organosolv is excellent for delignification but offers poor biomass deconstruction.ResultsIn this article, a hybrid method combining the cooking and fractionation of conventional organosolv pretreatment with the implementation of an explosive discharge of the cooking mixture at the end of pretreatment was developed. The effects of various pretreatment parameters (ethanol content, duration, and addition of sulfuric acid) were evaluated. Pretreatment of birch at 200 °C with 60% v/v ethanol and 1% w/wbiomass H2SO4 was proven to be the most efficient pretreatment condition yielding pretreated solids with 77.9% w/w cellulose, 8.9% w/w hemicellulose, and 7.0 w/w lignin content. Under these conditions, high delignification of 86.2% was demonstrated. The recovered lignin was of high purity, with cellulose and hemicellulose contents not exceeding 0.31 and 3.25% w/w, respectively, and ash to be < 0.17% w/w in all cases, making it suitable for various applications. The pretreated solids presented high saccharification yields, reaching 68% at low enzyme load (6 FPU/g) and complete saccharification at high enzyme load (22.5 FPU/g). Finally, simultaneous saccharification and fermentation (SSF) at 20% w/w solids yielded an ethanol titer of 80 g/L after 192 h, corresponding to 90% of the theoretical maximum.ConclusionsThe novel hybrid method developed in this study allowed for the efficient fractionation of birch biomass and production of pretreated solids with high cellulose and low lignin contents. Moreover, the explosive discharge at the end of pretreatment had a positive effect on enzymatic saccharification, resulting in high hydrolyzability of the pretreated solids and elevated ethanol titers in the following high-gravity SSF. To the best of our knowledge, the ethanol concentration obtained with this method is the highest so far for birch biomass.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.