This paper examines the role of identification to home and host cultures on the pursuit of higher educations for individuals with immigrant backgrounds. Identity is defined according to a two‐dimensional acculturation framework based on strength of identification to both ethnic background cultures and the majority culture. Results indicate that integrated men that identify with both the majority and the background culture are associated with higher probabilities of completed tertiary educations than men that identify only with the majority culture as well as men with weak affiliations to both background and majority cultures. These results hold despite controls for early education outcomes and socioeconomic status. No systematic differences in higher educational attainment by identity are found for women once differences in early education are accounted for. These results put into question the premise of oppositional identities, i.e., a trade‐off between ethnic identity and higher educational achievement.
Silver (Ag) nanoparticles (NP) and poly(lactide acid) (PLA) granules were microcompounded to form a nanocomposite. A series of PLA nanocomposite fibers containing, respectively, 0, 0.5, 1, 3 or 5 wt% Ag were produced and their antimicrobial activity against Gram-negative and Gram-positive bacteria evaluated. It was found that the PLA/Ag nanocomposite fibers exhibited increased antimicrobial activity, depending on the filler content. On the other hand, mechanical and thermal characterization tests, including thermogravimetric analysis, differential scanning calorimetry and tensile testing, showed that increasing concentrations of Ag hindered the mechanical properties of Nanocomposites due to partial agglomeration, leading to the generation of flaws. The crystallinity of the fibers was found to decrease by about 23% if the Ag content was increased to 5%. This could be attributed to a more rapid cooling rate resulting from the high thermal conductivity of the Ag particles.
Nonwoven spunbonded polyester has wide applications for both household goods and home furnishings and their usage has continually been growing. Nowadays, coloration of nonwoven fabrics is performed using conventional methods. Conventional polyester dyeing is an energy-intensive process as the dyeing is carried out above 120 °C to obtain efficient diffusion of dye. Furthermore, these high temperatures may cause some harmful effects on delicate nonwoven structures. Ultrasound assisted textile dyeing is an alternative method of conventional dyeing of textile materials, providing energy saving by reduced process temperature and time, lower consumptions of auxiliaries with increased dyeing efficiency. This paper focuses on comparing the conventional (high temperature (HT) and carrier dyeing) and ultrasonic dyeing of nonwoven spunbonded polyester fabrics to investigate the effect of ultrasound energy on dyeing performance. Experimental results indicated that highest or comparable dyeing performance can be achieved with ultrasound dyeing at lower temperature (85 °C, 60 min.) without carrier as compared to carrier dyeing (100 °C, 60 min.) and HT dyeing (130 °C, 60 min.), providing an increase of dye depth depending on the dye concentration and basis weight of the fabric. It was evidently seen that highest basis weight of fabric (107 g/m) used in this study exhibited greater color yield for each dye concentrations (K/S value of 4.90 at 0.2% dye concentration) as compared to conventional ones. The effect of ultrasound energy on reductive washing and fastness properties were also evaluated.
In this study, ZnO-loaded PA6 nanocomposite preparation and its antibacterial activity are investigated. This work aims to study the effect of the sizes and amount of the ZnO nanofiller on the antibacterial, mechanical, and thermal properties of the PA6/ZnO nanocomposites. The melt intercalation method is applied to prepare polyamide 6 (PA6) nanocomposite fibers, including 0, 0.5, 1, 3, 5 wt % zinc oxide (ZnO), using a laboratory-scale compounder. The antibacterial activity of the fibers against Staphylococcus aureus (ATCC 6538) as a gram positive bacterium and Klebsiella pneumoniae (ATCC 4352) as a gram negative bacterium is determined according to ASTM E 2149-0. Mechanical and thermal characterization tests are performed according to relevant standards (ASTM D7426-08, ASTM E1131-08, ASTM D3822-07; DSC, TGA, tensile tests). It is found that the dispersion of the ZnO particles within the PA6 matrix is homogenous according to scanning electron microscopy results. Antibacterial activity tests show that PA6/ZnO nanocomposite fibers exhibit antibacterial efficiency related to their nanoparticle contents. An increase in the amount of nanoparticles causes an increase of the antibacterial activity of the fibers. On the other hand, mechanical and thermal characterization tests show that the addition of ZnO nanoparticles does not affect the strength and thermal properties of the nanocomposites for these loadings.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.