Developed over approximately half a century, neural probe technology is now a mature technology in terms of its fabrication technology and serves as a practical alternative to the traditional microwires for extracellular recording. Through extensive exploration of fabrication methods, structural shapes, materials, and stimulation functionalities, neural probes are now denser, more functional and reliable. Thus, applications of neural probes are not limited to extracellular recording, brain-machine interface, and deep brain stimulation, but also include a wide range of new applications such as brain mapping, restoration of neuronal functions, and investigation of brain disorders. However, the biggest limitation of the current neural probe technology is chronic reliability; neural probes that record with high fidelity in acute settings often fail to function reliably in chronic settings. While chronic viability is imperative for both clinical uses and animal experiments, achieving one is a major technological challenge due to the chronic foreign body response to the implant. Thus, this review aims to outline the factors that potentially affect chronic recording in chronological order of implantation, summarize the methods proposed to minimize each factor, and provide a performance comparison of the neural probes developed for chronic applications.

Development of polymeric memristors is of great interest for wearable and implantable applications because of its flexibility and transparency. One of distinguished polymeric memristor materials is silk fibroin, which is a biodegradable protein extracted from Bombyx mori cocoons. However, fibroin memristors demonstrated earlier show low memory cell density (<100 cells mm−2). In this paper, silk fibroin memristors with cell density 25 times higher than that of the previously reported silk fibroin memristors by utilizing wafer‐scale UV photolithography are reported. Unlike shadow masking technique adopted in the previous researches, UV photolithography allows single‐micrometer‐scale alignment between layers to obtain a much denser structure. Memristive characteristics of the silk fibroin memristors are studied under different values of compliance current during SET process with different thickness of silk fibroin films. The ON/OFF ratio of the fabricated memristors is maintained over 1000 s of measurement, and remains the same during bending over a cylinder with a radius of curvature of 1.3 mm. It is shown that silk fibroin remains biocompatible and biodegradable after undergoing the fabrication process. Demonstrated transparency and lightweight characteristics are desirable for electronic components for wearable and implantable systems.

Background: Low-intensity transcranial focused ultrasound stimulation is a promising candidate for noninvasive brain stimulation and accurate targeting of brain circuits because of its focusing capability and long penetration depth. However, achieving a sufficiently high spatial resolution to target small animal sub-regions is still challenging, especially in the axial direction. Objective: To achieve high axial resolution, we designed a dual-crossed transducer system that achieved high spatial resolution in the axial direction without complex microfabrication, beamforming circuitry, and signal processing. Methods: High axial resolution was achieved by crossing two ultrasound beams of commercially available piezoelectric curved transducers at the focal length of each transducer. After implementation of the fixture for the dual-crossed transducer system, three sets of in vivo animal experiments were conducted to demonstrate high target specificity of ultrasound neuromodulation using the dual-crossed transducer system (n ¼ 38). Results: The full-width at half maximum (FWHM) focal volume of our dual-crossed transducer system was under 0.52 mm 3 . We report a focal diameter in both lateral and axial directions of 1 mm. To demonstrate successful in vivo brain stimulation of wild-type mice, we observed the movement of the forepaws. In addition, we targeted the habenula and verified the high spatial specificity of our dualcrossed transducer system. Conclusions: Our results demonstrate the ability of the dual-crossed transducer system to target highly specific regions of mice brains using ultrasound stimulation. The proposed system is a valuable tool to study the complex neurological circuitry of the brain noninvasively.

Silk fibroin is an excellent candidate for biomedical implantable devices because of its biocompatibility, controllable biodegradability, solution processability, flexibility, and transparency. Thus, fibroin has been widely explored in biomedical applications as biodegradable films as well as functional microstructures. Although there exists a large number of patterning methods for fibroin thin films, multilayer micropatterning of fibroin films interleaved with metal layers still remains a challenge. Herein, we report a new wafer-scale multilayer microfabrication process named aluminum hard mask on silk fibroin (AMoS), which is capable of micropatterning multiple layers composed of both fibroin and inorganic materials (e.g., metal and dielectrics) with high-precision microscale alignment. To the best of our knowledge, our AMoS process is the first demonstration of wafer-scale multilayer processing of both silk fibroin and metal micropatterns. In the AMoS process, aluminum deposited on fibroin is first micropatterned using conventional ultraviolet (UV) photolithography, and the patterned aluminum layer is then used as a mask to pattern fibroin underneath. We demonstrate the versatility of our fabrication process by fabricating fibroin microstructures with different dimensions, passive electronic components composed of both fibroin and metal layers, and functional fibroin microstructures for drug delivery. Furthermore, because one of the crucial advantages of fibroin is biocompatibility, we assess the biocompatibility of our fabrication process through the culture of highly susceptible primary neurons. Because the AMoS process utilizes conventional UV photolithography, the principal advantages of our process are multilayer fabrication with high-precision alignment, high resolution, wafer-scale large area processing, no requirement for chemical modification of the protein, and high throughput and thus low cost, all of which have not been feasible with silk fibroin. Therefore, the proposed fabrication method is a promising candidate for batch fabrication of functional fibroin microelectronics (e.g., memristors and organic thin film transistors) for next-generation implantable biomedical applications.

Chronic monitoring of bladder activity and urine volume is essential for patients suffering from urinary dysfunctions. However, due to the anatomy and dynamics of the bladder, chronic and precise monitoring of bladder activity remains a challenge. Here, we propose a new sensing mechanism that measures the bladder volume using a resistive ladder network with contact switches. Instead of measuring the impedance between the electrode continuously, the proposed sensor provides a digitized output (‘on’ or ‘off’) when the bladder volume reaches a certain threshold value. We present simple proof-of-concept sensors which compare the discrete-mode operation to the continuous-mode operation. In addition, by using multiple pairs of this contact-mode switch in a resistor ladder structure, we demonstrate monitoring of the bladder volume in four discrete steps using an idealized balloon and an ex vivo pig’s bladder. We implemented the resistive ladder network using a conductive polypyrrole/agarose hydrogel composite which exhibits a Young’s modulus comparable to that of the bladder wall. Compared to the continuous-mode operation, the proposed sensing mechanism is less susceptible to drift due to material degradation and environmental factors.