This study investigated the efficacy and safety of masitinib, a selective tyrosine kinase inhibitor capable of downregulating mast cell functions, for treatment of canine atopic dermatitis (CAD). Dogs with confirmed CAD received masitinib at 12.5 mg/kg/day (n = 202) or control (n = 104) for 12 weeks. A reduction in CAD Extent and Severity Index (CADESI-02) score of ≥ 50% at week 12 was observed in 61% of masitinib-treated dogs versus 35% of control dogs (P < 0.001), according to the modified intent-to-treat population. For dogs resistant to ciclosporin and/or corticosteroids (60% of the study population), CADESI-02 response rates were 60 versus 31%, respectively (P = 0.004). The mean reduction in pruritus score of severely pruritic dogs was 46 versus 29%, respectively (P = 0.045). Furthermore, 65% of owners with severely pruritic dogs assessed masitinib efficacy as good/excellent versus 35% control (P = 0.05). Overall, 63% of investigators assessed masitinib efficacy as good/excellent versus 35% control (P < 0.001). Premature discontinuations from the modified intent-to-treat population (28.2% masitinib versus 26.0% control) were mainly due to adverse events (13.4 versus 4.8%, respectively) or lack of efficacy (12.4 versus 18.3%, respectively). In total, 13.2% dogs presented with severe adverse events (16.0% masitinib versus 7.7% control). Masitinib showed a risk of reversible protein loss, although regular surveillance of blood albumin and proteinuria allowed for discontinuation of treatment while the dog was still clinically asymptomatic. Masitinib proved to be an effective and mostly well-tolerated treatment of CAD, including severe and refractory cases, with medically manageable adverse effects.
A new way to create macropores in calcium phosphate cements has been developed. The method consists in adding a mixture of porogenic agents to the initial solid phase of the cement. The reaction of the effervescent mixture which forms CO 2 bubbles occurs in the first moments following mixing of the cement. Apparent porosity values showed a drastic increase both in macropores with an average size of 0.5-3.5 mm and in total porosity (-even higher than 75). Only, due to the increase of porosity, the compressive strength of the porous cement decreases significantly.
This paper reports the synthesis of Fe3O4 nanoparticles with a hydrophobic surface functionalized with oleic acid through a simple and efficient route in air atmosphere and by co-precipitation. The hydrophobic surfactant agent was added in the magnetic crystal growth stage. Magnetic nanofluid was obtained by ultrasonic dispersion of magnetic nanoparticles in a carrier liquid � vegetable oil. The sample as powder has been characterized by X-Ray Diffraction (XRD), Fourier Transform Infrared (FTIR) spectroscopy, Transmission Electron Microscopy (TEM), and Vibrating Sample Magnetometry (VSM) at room temperature. The magnetic nanofluid in vegetal oil was investigated by determining the stability of the nanoparticles in the vegetable oil through UV-Vis spectrometry method, the magnetic properties through Vibrating Sample Magnetometry (VSM) method at room temperature, and thermal conductivity as function of magnetic nanoparticles volume concentration and of temperature.
The hydrophilic g-Fe2O3 nanoparticles coated with polyvinylpyrrolidone (PVP) were prepared in one step of the modified polyol method combined with an additional heat treating. The presence of maghemite (g-Fe2O3) phase was confirmed by using X-ray diffraction (XRD) and Raman Spectrometry on powder. FT-IR spectroscopy confirmed the presence of PVP on the nanoparticles surface and the Zeta potential also supported the coating of nanoparticles with a layer of PVP and a good stability in aqueous medium. SEM analysis showed that the prepared g-Fe2O3 nanoparticles have a spherical structural morphology with the tendency of agglomeration. Hysteresis loop shows a ferromagnetic behaviour at room temperature with a saturation magnetization up to 57 emu/g.
This paper reports the synthesis of FeNi3 alloy nanoparticles by chemical reduction of the Fe2+ and Ni2+ ions, from the corresponding chlorides, with hydrazine (N2H4�H2O) as a reducing agent in aqueous solution at room temperature by modifying the molar ratio of the ions Fe2+: Ni2+, reaction time, with and without amine-type growth promoter, and reducing both, with or without ultrasonic aid. The FeNi3 alloy nanoparticles have been investigated by XRD, EDS spectrum analysis, SEM and VSM. When the molar ratio of Fe2+ and Ni2+ is equal to 1:3, reducing both, with or without ultrasonic aid, Fe2+ and Ni2+ were completely reduced into Fe and Ni, resulting FeNi3 alloy with a face-centered cubic (fcc) crystal structure. EDS analysis supported the presence of metal ions in atomic weight corresponding to the stoichiometric ratio of initial reaction. SEM analysis showed that nanoparticles of FeNi3 alloy have a spherical structural morphology. Hysteresis loop show a ferromagnetic behaviour of the FeNi3 alloy nanoparticles at room temperature.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.