RESUMO:O tamanho adequado e a forma das parcelas experimentais para candeia é uma alternativa para garantir interpretações corretas e conclusões bem fundamentadas sobre o cultivo dessa espécie. Assim, neste trabalho, objetivou-se defi nir o tamanho ótimo, tamanhos convenientes e forma adequada de parcelas experimentais para Eremanthus erythropappus, para avaliação das principais características dendrométricas em plantios experimentais. Para isso, foi utilizado um ensaio de uniformidade contendo 400 plantas, as quais tiveram a circunferência, a altura e o volume determinados. Foram simuladas 31 combinações de tamanho/forma de parcelas experimentais. Para a determinação do tamanho ótimo, foram utilizados três métodos de curvatura e um método baseado no modelo linear segmentado com platô. A forma adequada foi determinada a partir do critério de informação relativa e coefi ciente de variação. O tamanho conveniente foi estimado pelo de método Hatheway. Os resultados e as conclusões obtidas foram as de que o tamanho de parcelas experimentais para candeia, de modo a permitir análise das principais características dendrométricas, deve ser de 60 plantas úteis, sendo a conformação retangular 2×30 (linhas × plantas) a forma mais adequada. O tamanho conveniente é muito fl exível e permite adequação do tamanho da parcela experimental com as condições, características e limitações do experimento.Palavras-chave: Candeia, ensaio de uniformidade, máxima curvatura, modelo linear segmentado com platô, método de Hateway. SIZE AND SHAPE OF EXPERIMENTAL PLOTS FOR
EQUAÇÕES HIPSOMÉTRICAS PARA Eucalyptus spp. NÃO MANEJADO EM IDADE AVANÇADA COM TÉCNICAS DE INCLUSÃO DE COVARIANTESRESUMO: Objetivo do trabalho foi estabelecer equações hipsométricas para Eucalyptus spp. não manejado em idade avançada. Para isto, foram mensurados o diâmetro e a altura de 513 fustes distribuídos em 11 espécies e ajustes hipsométricos foram testados por seis modelos de regressão, sendo selecionado aquele com os melhores valores de Critério de Informação de Akaike (AIC), Erro Padrão da Estimativa (Syx), teste de Razão de Máxima Verossimilhança e Análise Gráfica de Resíduos. Posteriormente, o melhor modelo foi submetido à inclusão de covariantes, Qualidade do Fuste (Qf) e Espécie (Sp), por meio da decomposição dos seus parâmetros. Nessas condições, o modelo de Chapman e Richards se mostrou o de melhor desempenho tanto em sua forma original, quanto após a inclusão das covariantes, sendo que, ao compará-los obteve-se uma redução no modelo com covariantes de 71 unidades em AIC, 7,4% em Syx e melhoria significativa em todos os aspectos da distribuição de resíduos. Portanto, foi possível estabelecer equações hipsométricas adequadas para eucalipto não manejado em idade avançada, com e sem inclusão de covariantes, sendo que a última técnica resultou em melhoria significativa na qualidade do ajuste. HYPSOMETRIC EQUATIONS FOR UNMANAGED Eucalyptus spp. IN OLD AGE WITH TECHNIQUES FOR THE INCLUSION OF COVARIATESABSTRACT: The aim of the study was to establish hypsometric equations for unmanaged Eucalyptus spp. in old age. For this purpose we measured the diameter and height of 513 stems distributed in 11 species and the hypsometric relationship was established by six regression models, being selected the one with the best Akaike Information Criterion (AIC), standard error of estimative (Syx), Maximum Likelihood Ratio Test and Residual Graphical Analysis. Subsequently, the best model has undergone the inclusion of the covariates stem quality (Qf) and Species (Sp) by means of the decomposition of its parameters. Under these conditions, the model of Chapman and Richards showed the best performance in both modeling approaches. When compared both models, we observed a reduction of 71 AIC units and 7.4% in Syx and a significant improvement in all aspects of the residual distribution in the model with covariates. The results show that it is possible to provide hypsometric equations suitable for unmanaged Eucalyptus in old age, with and without addition of covariates, and the last technique has provided significant improvement in the quality of fit of the models.
RESUMOTradicionalmente, a maior parte dos estudos utiliza modelos lineares para o ajuste da relação hipsométrica, tendo o diâmetro a 1,30 m do solo (DAP) como única variável independente. Entretanto, sabe-se que a linearidade não caracteriza fielmente o crescimento biológico e que outras variáveis relativas ao povoamento, ou às árvores individuais, exercem influência sobre o crescimento em altura. O objetivo deste trabalho foi avaliar o desempenho de modelos lineares e não lineares no ajuste da relação hipsométrica de duas espécies de Pinus tropicais, bem como verificar o efeito da adição de covariantes na estimativa dos parâmetros destes modelos. Os dados utilizados provêm de plantios de Pinus caribaea var. hondurensis e Pinus oocarpa, com diferentes idades e localizados em áreas com diferentes índices de sítio, nos municípios de Nova Ponte e Indianópolis, estado de Minas Gerais. Modelos lineares e não lineares foram ajustados em suas formas originais e com a inclusão das covariáveis idade, sítio e espécie nas estimativas de cada parâmetro dos modelos. Os modelos foram comparados por meio dos critérios estatísticos: erro padrão da estimativa (S yx ), Critério de Informação de Akaike (AIC), Critério de Informação Bayesiano (BIC) e também pela análise gráfica de resíduos padronizados. Constatou-se que modelos não lineares demonstram maior capacidade de descrever o comportamento da variável altura, e que a inclusão das covariáveis tornou superior a qualidade dos ajustes, considerando os critérios estatísticos de precisão adotados. Palavras-chave: curvas h/d; pinus tropicais; relação altura-diâmetro; covariáveis. ABSTRACTTraditionally, most studies use linear models to adjust the hypsometric relationship using diameter at breast height (DBH) as the only independent variable. However, it is known that the linearity does not characterizes faithfully biological growth and other variables related to forest stand, or individual trees, influence in height growth. The aim of this study was to evaluate linear and nonlinear models' performance for hypsometric relationship of two tropical pine species, as well as the effect of covariates adding in models' parameters estimation. The data used provided from Pinus caribaea var. hondurensis and Pinus oocarpa stands, with different ages and site index, located in the counties of Nova Ponte and Indianápolis, Minas Gerais state. Linear and nonlinear models were fitted in its original form and including the covariates age, site index and species in the estimation of each models' parameter. The models were compared using the following statistical criteria: residual standard error (Syx), Akaike Information Criteria (AIC), Bayesian Information Criteria (BIC) and
RESUMO:Existem importantes fatores ambientais que afetam diretamente a taxa de crescimento das espécies florestais, que podem provocar alterações em suas propriedades e, por sua vez, afetar a densidade da madeira. Como a ocorrência das diferentes fitofisionomias está relacionada a fatores ambientais característicos, neste trabalho, objetivou-se verificar o comportamento geral da densidade da madeira das espécies arbóreas nativas, frente a essas diferentes condições de crescimento no estado de Minas Gerais. Os dados de cubagem rigorosa das árvores foram obtidos do Inventário Florestal de Minas Gerais. Foram utilizados dados de 1988 árvores nas diversas fisionomias florestais. De cada árvore foram retirados cinco discos de madeira nas posições 0, 25, 50, 75 e 100% da altura total. A densidade básica de cada disco foi determinada segundo a norma NBR 7190/1997. As fitofisionomias ombrófila, semidecídua, cerradão, cerrado típico e decídua apresentaram, respectivamente, médias de densidade da madeira de 0,502; 0,561; 0,585; 0,612 e 0,675 g.cm -3 , todas estatisticamente distintas. Foi encontrada uma relação clara e coerente da densidade da madeira com as características edafoclimáticas que condicionam as diferentes fitofisionomias no estado de Minas Gerais. As fisionomias florestais apresentam condições ambientais tão características, que afetam a composição florística e, também, a atividade fisiológica e cambial das plantas, ocasionando densidades da madeira próprias às formações florestais.Palavras-chave: Densidade básica, fisionomia florestal, Inventário Florestal de Minas Gerais. ENVIRONMENT EFFECTS ON WOOD DENSITY OF VEGETATION TYPES IN MINAS GERAIS STATE -BRAZIL INTRODUÇÃOFatores ambientais influenciam a variabilidade da madeira, uma vez que afetam a taxa de crescimento das espécies florestais (RIGATTO et al., 2004). O efeito no crescimento está relacionado ao impacto sobre o período vegetativo e aos processos fisiológicos das plantas (ANTONOVA; STASOVA, 1997). Como resposta, as árvores adaptam seus processos fisiológicos de acordo com as condições ambientais, com reflexo na atividade cambial e na anatomia do lenho (VILLAR et al., 1997). Como a densidade da madeira é resultado da combinação da quantidade e da distribuição dos diferentes elementos anatômicos (ROQUE; TOMAZELLO FILHO, 2009), as variações edafoclimáticas, certamente, irão afetá-la de alguma maneira.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.