Abstract.Progress, since the ITER Physics Basis publication, in understanding the processes that will determine the properties of the plasma edge and its interaction with material elements in ITER is described. Experimental areas where significant progress has taken place are : energy transport in the SOL in particular of the anomalous transport scaling, particle transport in the SOL that plays a major role in the interaction of diverted plasmas with the main chamber material elements, ELM energy deposition on material elements and the transport mechanism for the ELM energy from the main plasma to the plasma facing components, the physics of plasma detachment and neutral dynamics including the edge density profile structure and the control of plasma particle content and He removal, the erosion of low and high Z materials in fusion devices, their transport to the core plasma and their migration at the plasma edge including the formation of mixed materials, the processes determining the size and location of the retention of tritium in fusion devices and methods to remove it and the processes determining the efficiency of the various fuelling methods as well as their development towards the ITER requirements. This experimental progress has been accompanied by the development of modelling tools for the physical processes at the edge plasma and plasma-materials interaction and the further validation of these models by comparing their predictions with the new experimental results. Progress in the modelling development and validation has been mostly concentrated in the following areas : refinement of the predictions for ITER with plasma edge modelling codes by inclusion of detailed geometrical features of the divertor and the introduction of physical effects, which can play a 2 major role in determining the divertor parameters at the divertor for ITER conditions such as hydrogen radiation transport and neutral-neutral collisions, modelling of the ion orbits at the plasma edge, which can play a role in determining power deposition at the divertor target, models for plasma-materials and plasma dynamics interaction during ELMs and disruptions, models for the transport of impurities at the plasma edge to describe the core contamination by impurities and the migration of eroded materials at the edge plasma and its associated tritium retention and models for the turbulent processes that determine the anomalous transport of energy and particles across the SOL. The implications for the expected performance of the reference regimes in ITER, the operation of the ITER device and the lifetime of the plasma facing materials are discussed. Introduction.This chapter outlines the significant progress achieved since the ITER Physics Basis in understanding basic scrape-off layer (SOL) and divertor processes in a tokamak. The interaction of plasma with first-wall surfaces will have considerable impact on the performance of fusion plasmas, the lifetime of plasma facing components, and the retention of tritium in next step Burning Plasma E...

Analysis of Type I ELMs from ongoing experiments shows that ELM energy losses are correlated with the density and temperature of the pedestal plasma before the ELM crash. The Type I ELM plasma energy loss normalized to the pedestal energy is found to correlate across experiments with the collisionality of the pedestal plasma (ν * ped ), decreasing with increasing ν * ped . Other parameters affect the ELM size, such as the edge magnetic shear, etc, which influence the plasma volume affected by the ELMs. ELM particle losses are influenced by this ELM affected volume and are weakly dependent on other pedestal plasma parameters. In JET and DIII-D, under some conditions, ELMs can be observed ('minimum' Type I ELMs with energy losses acceptable for ITER), that do not affect the plasma temperature. The duration of the divertor ELM power pulse is correlated with the typical ion transport time from the pedestal to the divertor target (τ Front || = 2πRq 95 /c s,ped ) and not with the duration of the ELMassociated MHD activity. Similarly, the timescale of ELM particle fluxes is also determined by τ Front ||. The extrapolation of the present experimental results to ITER is summarized.

The experimental characteristics of divertor detachment in the JET tokamak with the Mark I pumped divertor are presented for Ohmic, L-mode and ELMy H-mode experiments with the main emphasis on discharges with deuterium fuelling only. The range over which divertor detachment is observed for the various regimes as well as the influence of divertor configuration, direction of the toroidal field, divertor target material and active pumping on detachment will be described. The observed detachment characteristics such as the existence of a considerable electron pressure drop along the field lines in the scrape-off layer, and the compatibility of the decrease in plasma flux to the divertor plate with the observed increase of neutral pressure and the D α emission from the divertor region will be examined in the light of existing results from analytical and numerical models for plasma detachment. Finally, a method to evaluate the degree and window of detachment is proposed and all the observations of the JET Mark I divertor experiments summarised in the light of this new quantitative definition of divertor detachment.

No abstract