No abstract

In this research, products with high quality were obtained from natural sources. The sensorial qualities, chemical characterization, and physical properties of gelatin extracted from chicken feet were compared with commercial gelatins. The extraction process was performed using acetic acid on a concentration ranging from 0.318% to 3.682%, processing time between 1.0 h and 8.4 h and extraction temperature between 43.3 °C and 76.8 °C. After the end of each assay, the yield was measured. Results showed that, under the best conditions, the collagen extraction yield was above 8%, and comprised 78.525 g/100 g of protein. Collagen analyzed by ICP-MS was composed of 99.44% of macro-minerals that are of great importance to human health. ATR-FTIR analysis showed that approximately 70.90% of the total protein from chicken feet is collagen, whereas, in commercial gelatin, only 30.31% is collagen. When comparing chicken gelatin with commercial gelatin, most sensory attributes were similar and chicken gelatin gained acceptance by more than 80% of the consumers. Additionally, the collagen films obtained from chicken feet and swine showed water absorption, odors, and texture characteristics similar to commercial material, such as latex and celofane. Consequently, due to its similarity to human skin, it is possible to apply it as a biocurative.

-The solubility of 93% pure bixin in supercritical carbon dioxide (SC-CO 2 ) and of the bixin present in annatto seeds (Bixa orellana L.) was measured. For the seeds, the measurements were made in a temperature range from 30 to 50 o C and pressure between 10 and 35 MPa and for the pure bixin, at 40 o C from 10 to 35 MPa. The main pigments of annatto seeds are bixin and norbixin, but the extracts only showed the presence of cis and trans-bixin, indicating that norbixin is not soluble in SC-CO 2 . The annatto seeds used in the experiments contained about 2.7% bixin and 3.1% oil. In the seeds, the crossover point of solubility was at about 28 MPa and values for solubility were about ten times higher than those of the pure bixin, giving evidence that the oil acted as a co-solvent with the CO 2 .

No abstract

The essential oil of key lime (Citrus aurantifolia) was obtained by steam distillation at normal conditions (1.0 bar/25ºC) with steam at 110ºC, during 10h. The GC analysis identified about 10 main substances, being limonene, p-cymene, myrcene and beta-bisabolene the most significant compounds. Aldehyde content increased significantly during distillation time (upper phase). After 10h of process, oil has presented more than 3% of aldehydes content due to oxidative reactions