The unsteady MHD free convection heat and mass transfer flow of a viscous, incompressible, and electrically conducting fluid passing through a vertical plate embedded in a porous medium in the presence of chemical reactions and thermal radiation is investigated. The effects of the Hall current, rotation and Soret are studied. Using the perturbation approach, one can obtain an accurate analytical solution to the governing equations for the fluid velocity, fluid temperature, and species concentration, provided that the initial and boundary conditions are acceptable. It is possible to obtain expressions for the shear stress, rate of heat transfer, and rate of mass transfer for both plates with the ramping temperature and isothermal conditions. On the one hand, the numerical values of the primary and secondary fluid velocities, fluid temperature, and species concentration are presented graphically. On the other hand, the numerical values of the shear stress and rate of mass transfer for the plate are presented in tabular form for various values of the relevant flow parameters. These values are given for a range of pertinent flow parameters. It was determined that an increase in the Hall and Soret parameters over the whole fluid area leads to a corresponding increase in the resulting velocity. The resultant velocity continually climbs to a high level due to the contributions of the thermal and solute buoyancy forces. Lowering the heat source parameter reduces the temperature distribution, resulting in a lower overall temperature. When there is a rise in the chemical reaction parameter over the whole fluid area, there is a corresponding decrease in the concentration. The concentration buoyancy force, Hall current, and Prandtl number reduce the skin friction. On the other hand, the permeability of the porous medium, rotation, chemical reaction, the Soret number, thermal buoyancy force, and mass diffusion all have the opposite effects on the skin friction.

In this study we analyzed the flow, heat and mass transfer behavior of Casson nanofluid past an exponentially stretching surface under the impact of activation energy, Hall current, thermal radiation, heat source/sink, Brownian motion and thermophoresis. Transverse magnetic field with the assumption of small Reynolds number is implemented vertically. The governing partial nonlinear differential equations of the flow, heat and mass transfer are transformed into ordinary differential equations by using similarity transformation and solved numerically by using Matlab bvp4c package. The impact of each of the Hall current parameter, thermal radiation parameter, heat source/sink parameter, Brownian motion parameter, Prandtl number, thermophoresis parameter and magnetic parameter on velocity, concentration and temperature, is discussed through graphs. The skin friction coefficient along the x-and z-directions, the local Nusselt number and the Sherwood number are calculated numerically to look into the inside behavior of the emerging parameters. It is witnessed that the flow velocity is a diminishing function of the thermal radiation parameter and the behavior has observed in the case of Hall parameter. Moreover, mounting values of Brownian motion parameter reduce the nanoparticle concentration profile.

In this article, a Riga plate is exhibited with an electric magnetization actuator consisting of permanent magnets and electrodes assembled alternatively. This exhibition produces electromagnetic hydrodynamic phenomena over a fluid flow. A new study model is formed with the Sutterby nanofluid flow through the Riga plate, which is crucial to the structure of several industrial and entering advancements, including thermal nuclear reactors, flow metres and nuclear reactor design. This article addresses the entropy analysis of Sutterby nanofluid flow over the Riga plate. The Cattaneo–Christov heat and mass flux were used to examine the behaviour of heat and mass relaxation time. The bioconvective motile microorganisms and nanoparticles are taken into consideration. The system of equations for the current flow problems is converted from a highly non-linear partial system to an ordinary system through an appropriate transformation. The effect of the obtained variables on velocity, temperature, concentration and motile microorganism distributions are elaborated through the plots in detail. Further, the velocity distribution is enhanced for a greater Deborah number value and it is reduced for a higher Reynolds number for the two cases of pseudoplastic and dilatant flows. Microorganism distribution decreases with the increased magnitude of Peclet number, Bioconvection Lewis number and microorganism concentration difference number. Two types of graphical outputs are presented for the Sutterby fluid parameter (β = −2.5, β = 2.5). Finally, the validation of the present model is achieved with the previously available literature.

The intention of this study is to carry out a numerical investigation of time-dependent magneto-hydro-dynamics (MHD) Eyring–Powell liquid by taking a moving/static wedge with Darcy-Forchheimer relation. Thermal radiation was taken into account for upcoming solar radiation, and the idea of bioconvection is also considered for regulating the unsystematic exertion of floating nanoparticles. The novel idea of this work was to stabilized nanoparticles through the bioconvection phenomena. Brownian motion and thermophoresis effects are combined in the most current revision of the nanofluid model. Fluid viscosity and thermal conductivity that depend on temperature are predominant. The extremely nonlinear system of equations comprising partial differential equations (PDEs) with the boundary conditions are converted into ordinary differential equations (ODEs) through an appropriate suitable approach. The reformed equations are then operated numerically with the use of the well-known Lobatto IIIa formula. The variations of different variables on velocity, concentration, temperature and motile microorganism graphs are discussed as well as force friction, the Nusselt, Sherwood, and the motile density organism numbers. It is observed that Forchheimer number decline the velocity field in the case of static and moving wedge. Furthermore, the motile density profiles are deprecated by higher values of the bio convective Lewis number and Peclet number. Current results have been related to the literature indicated aforementioned and are found to be great achievement.

The motive of this paper is to explore the influence of unsteady flow near a stagnation-point comprising Eyring-Powell nanoliquid over a convectively-heated stretched surface. The highly non-linear PDEs are transmuted into ODEs through similarity transformation before being settled numerically via the shooting technique. The numerical outcomes of prominent parameters are examined by a graphical representation and in tabular form. It is investigated that velocity profile shows an increasing behaviour due to the stretched parameter, while the conflicting effect is examined on temperature distribution and concentration of nanoparticle. Finally, we compare our results with the available literature and found this to be in excellent agreement.