Organometal halide perovskite solar cells have been constructed using soluble tetra-nbutyl-copper phthalocyanine as hole transporting material. Devices were constructed and characterized under ambient conditions of 50-60% ambient humidity. Soluble copper phthalocyanine gave a modest PCE of 7.3% but when a buffer layer of either Al 2 O 3 or graphene oxide was introduced between the perovskite and the hole transporting layer the cell efficiency extensively increased and reached 14.4% in the presence of graphene oxide.Corresponding data obtained by employing the standard spiro-OMeTAD as hole transporter gave equivalent performance. Combination then of tetra-n-butyl-copper phthalocyanine with graphene oxide offers a very good alternative of simpler and stable materials for perovskite solar cell construction. The presently recorded data highlight the role of the buffer layer, especially graphene oxide, as the material which blocks shunt paths and facilitates hole transfer between the perovskite and the hole transporting layer.

No abstract

Perovskite solar cells with an inverted p-i-n architecture were constructed under ambient conditions by employing materials of lower cost than standard cells. Thus, graphene oxide was used as a hole transporting material and Li-modified graphene oxide as an electron transporting material, while Al was used as a counter electrode. A maximum solar conversion efficiency of 10.2% was achieved by adding a Ti-based sol on the top of the Li-modified graphene oxide layer.

Functional perovskite solar cells can be made by using a simple, inexpensive and stable soluble tetra-n-butyl-substituted copper phthalocyanine (CuBuPc) as a hole transporter. In the present study, TiO/reduced graphene oxide (T/RGO) hybrids were synthesized via an in situ solvothermal process and used as electron acceptor/transport mediators in mesoscopic perovskite solar cells based on soluble CuBuPc as a hole transporter and on graphene oxide (GO) as a buffer layer. The impact of the RGO content on the optoelectronic properties of T/RGO hybrids and on the solar cell performance was studied, suggesting improved electron transport characteristics and photovoltaic parameters. An enhanced electron lifetime and recombination resistance led to an increase in the short circuit current density, open circuit voltage and fill factor. The device based on a T/RGO mesoporous layer with an optimal RGO content of 0.2 wt% showed 22% higher photoconversion efficiency and higher stability compared with pristine TiO-based devices.