O Brasil é um dos maiores produtores de soja e, consequentemente, gera uma grande quantidade de resíduos provenientes dessa cultura, os quais poderiam ser aproveitados na confecção de aglomerados. Este trabalho objetivou analisar as características físico-mecânicas de painéis aglomerados, produzidos com partículas de resíduos de soja e eucalipto, tratadas em água fria e hidróxido de sódio. Adotou-se uma proporção de 50:50 de partículas de eucalipto e casquilho de soja. A densidade nominal dos painéis foi 0,60 g/cm³. Foi utilizado adesivo uréia-formaldeído com teor de sólidos de 12 %. Foram adotados três tratamentos: partículas tratadas com água fria e partículas tratadas com NaOH (com concentração de 1%, além de um tratamento com partículas controle. Os componentes químicos dos materiais lignocelulósicos foram quantificados para as três situações. Os parâmetros do ciclo de prensagem foram: 4 MPa (pressão), 150 °C (temperatura), durante 8 min. Foram observadas reduções nos teores de extrativos totais, após os tratamentos. Em relação às propriedades físicas, os tratamentos aplicados nas partículas não demonstraram eficiência, pois não trouxeram melhorias para a estabilidade dimensional dos painéis e nenhum dos tratamentos atingiram ao valor mínimo especificado pela norma utilizada. Para as propriedades mecânicas, os painéis produzidos com partículas tratadas com água atenderam as exigências para o MOE. Para as propriedades de tração perpendicular e dureza Janka, todos os painéis alcançaram os valores especificados pela NBR 14810 (2013). As outras propriedades testadas (MOR, APS e APT) não atenderam a norma. Os tratamentos aplicados nas partículas de soja e eucalipto não demonstraram eficiência para as propriedades físicas, porém algumas propriedades mecânicas atenderam aos requisitos mínimos da NBR 14810 (2013) para painéis não estruturais para uso interno em ambiente seco (Tipo P2).
Os oriented strand board (OSB) são um importante produto de madeira projetado, fabricado através da colagem de partículas strand em camadas cruzadas, sendo amplamente aplicado em construções, embalagens, decks, pisos, revestimentos de paredes e até mesmo para fins de suporte de carga. Para a produção destes painéis, podemos utilizar de biomassa da agricultura, como resíduos da atividade cafeeira. O objetivo desta pesquisa foi avaliar a composição química da madeira de café e do pinus, bem como as propriedades físicas e mecânicas dos painéis produzidos com a substituição do pinus pelo resíduo. Os painéis OSB produzidos, utilizaram a substituição do pinus pela madeira de café em 0 (T1), 25 (T2), 50 (T3), 75 (T4) e 100% (T5). Os resultados mostram que houve melhorias significativas nas propriedades físico-mecânicas e que os tratamentos atenderam o mínimo exigido por norma, com exceção do T2. Evidencia-se, portanto, o potencial de utilização do resíduo da madeira de café para a produção de painéis OSB, uma vez que este bioproduto que evitará a destinação incorreta do resíduo e vários outros problemas ambientais.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.