Non-thermal oil recovery methods, such as caustic, acid and emulsion flooding, hold promisefor certain types of viscous oils under favourable conditions. This investigation was concerned with the recovery of the Lloydminster crude (Saskatchewan) and the Morichal crude (Venezuela) at the respective reservoir temperatures, using these three techni_ ques.Thefirstpartofthestudywascon-cerned with a systematic examination Pf the emulsification of each cru wit@ aqueous solutions, having pH's 1 nging from acid to basic. The Lloydi inster crude yielded both oil-in-water and water-in-oil emulsions, whereas the Morichal crude produced only water-in-oil emulsions, stable at the respective reservoir temperatures. The second part of the study involved core floods, utiliz-ing (I) selected emulsions, (ii) acid solu-tions and (iii) caustic solutions. The oil recovery in the case of the Lloydminster crude was 30 to 46% of the in-place oil, i.e., about 41 to 8801o greater than that obtainable by a waterflood. The type and size of the slug were the criticalfactors in determining recovery. The oil recovery in the case of the Morichat crude was 59 to 65%.In both cases, emulsion slugs were more effective than caustic or acid slugs. The paper discusses the drawbacks of such non-thermal methods, as well as conditions under which such methods are likely to be successful. Introduction & BaCkground In recent years, caustic flooding and emulsion flooding of viscous oil forma-tions have received a great deal of atten-tion, and hold considerable promise for the recovery of moderately viscous oils._ The status of these processes was recent-ly reviewed by Johnson(l). He discussed four principal mechanisms for caustic flooding: emulsification and entrap-ment, wettability reversal from oil-wet to water-wet, or vice versa, and emulsification and entrapment. In the case of viscous oils, it would seem that emulsification and entrapment is the dominant mechaniSM(2). The caustic reacts with the organic acids in the residual oil, leading to the formation of an oil-in-water emulsion in situ. ln a later-wet porous medium, the emulsion ciropiets move downstream with the flowing caustic, and are entrapped again in small pore throats. The over-all effect is a reduction in the water mobility, w'nich is beneficial in improving the volumetric sweep. The crucial factor determining the success of caustic flooding is the crude composition, and the nature of the polar compounds pre-sent. Ehrlich, Hasiba and Raimondi(3) describe an efficient screening method for this purpose. Cooke, Williams and r'ol.odzie(4) also outline guidelines for evaluating potential caustic floods.Emulsion flooding involves the preparation of the crude and water emulsion prior to injection, and offers a possible alternative if an emulsion can_ not be formed in situ.A number of laboratory studies of caustic flooding have been reported. Jennirigs(5) gives caustic solution -crude oil interfacial measurements for 164 crude oils from 78 fields. Almost all crude oils with API gravities of 201 or l...
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.